Abstract:With the growing awareness to protect the urban environment and the increasing demand for strategic materials, recycling of postconsumer lithium-ion batteries has become imperative. This study aims to recover lithium, cobalt, nickel, and manganese from a LiNi0.15Mn0.15Co0.70O2 cathode material of spent lithium-ion batteries of an electric vehicle. By utilizing systematic experimental and theoretical approaches based on the design of experiment and response surface methodology, the best leachant between HCl and H2SO4 + H2O2 and the optimal operating conditions are determined. Leaching with 1.0 M H2SO4 mixed with 0.62 wt % H2O2 at a liquid-to-solid ratio of 25.8 mL g–1 and a temperature of 51 °C for 60 min results in ∼100% recovery of all four metals. After leaching, cobalt, nickel, and manganese are coprecipitated as Ni0.15Mn0.15Co0.70(OH)2 at pH above 11, while lithium is precipitated as lithium carbonate. These precipitates are mixed and sintered to generate a new cathode material, which is used to make a battery with high electrochemical performance. Valorization of spent lithium-ion batteries from electric vehicles enables conserving natural resources and protecting ecosystems, both of which enable the long-term sustainability of the biosphere while at the same time contributing to the circular economy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06869?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06869</a>.Additional information on the experimental and statistical methodology and supporting results (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06869/suppl_file/sc0c06869_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Short-process simultaneously recycling cobalt and manganese from environment-hazardous di-methyl-dithiocarbamate chelate slag as lithium-ion battery cathode material

Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes

Subtractive transformation of cathode materials in spent Li-ion batteries to a low-cobalt 5 V-class cathode material

A feasible process for recycling valuable metals from LiNi0.5Co0.2Mn0.3O2 cathode materials of spent Li-ion batteries

Recovering valuable metals from the leaching liquor of blended cathode material of spent lithium-ion battery

Closed-Loop Recycling of Lithium, Cobalt, Nickel, and Manganese from Waste Lithium-Ion Batteries of Electric Vehicles

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Electrolytic Separation and Reuse of Active Materials from Discarded Lithium-Ion Batteries

Recycling of spent lithium-ion batteries: Selective ammonia leaching of valuable metals and simultaneous synthesis of high-purity manganese carbonate

Comprehensive Recovery of NCM Cathode Materials for Spent Lithium-Ion Batteries by Microfluidic Device

Recovery of high-purity metallic cobalt from lithium nickel manganese cobalt oxide (NMC)-type Li-ion battery

Recycling of mixed lithium-ion battery cathode materials with spent lead-acid battery electrolyte with the assistance of thermodynamic simulations

Selective recycling of lithium from spent LiNixCoyMn1-x-yO2 cathode via constructing a synergistic leaching environment

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

High Value-Added Utilization of Waste Hydrodesulfurization Catalysts: Low-Cost Synthesis of Cathode Materials for Lithium-Ion Batteries

Leaching Mechanisms of Recycling Valuable Metals from Spent Lithium-Ion Batteries by a Malonic Acid-Based Leaching System

Recovery of valuable metals and modification of cathode materials from spent lithium-ion batteries

Sustainable upcycling of mixed spent cathodes to a high-voltage polyanionic cathode material

Recycling for Recovery of Critical Metals from LiCoO2 Cathode Material Through Methanesulfonic Acid-Citric Acid Organic Leaching System

Recover value metals from spent lithium-ion batteries via a combination of in-situ reduction pretreatment and facile acid leaching