Abstract:Ag/SnO 2 In 2 O 3 electrical contact materials with a fiber-like and/or microparticle structure were fabricated by internal oxidation using Ag-Sn-In- x Ni ( x = 0–1.5 wt.%) alloys as raw materials. The impact of Ni addition on the physical properties and electrical performance of the Ag/SnO 2 In 2 O 3 materials was investigated. The samples were characterized by x-ray diffraction, scanning electron microscopy, and x-ray photoelectron spectroscopy, and the electrical performance was estimated by temperature rise behavior, anti-welding force, and AC-4 service life testing, respectively. The results show that the dual strengthening effect of homogeneous microparticles and hierarchical fiber-like structures clearly improved the physical properties, temperature rise, welding resistance, and AC-4 service life. In particular, the sample with 0.5 wt.% Ni content demonstrated excellent AC-4 electrical life performance compared with samples with Ni content of 0 wt.% and 1.5 wt.%, and traditional internally oxidized Ag/CdO materials. Therefore, this study clearly illustrates the influence of Ni addition in Ag/SnO 2 In 2 O 3 electrical contact materials. Graphical Abstract Ag/SnO 2 In 2 O 3 electrical contact materials with a fiber-like and/or microparticle structure were fabricated by internal oxidation using as-synthesized Ag-Sn-In- x Ni ( x = 0~1.5 wt.%) alloys as raw materials. The dual strengthening effects of a homogeneous fine gain structure and hierarchical fiber-like structure clearly improved their temperature rise, welding resistance, and AC-4 service life.

Influence of Ni content on arc erosion behavior of Ag/Ni electrical contact materials

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Influence of Operation Numbers on Arc Erosion of Ag/CdO Electrical Contact Materials

Influence of fabrication technology on arc erosion of Ag/10SnO2 electrical contact materials

Comparative study of the microstructure and arc erosion resistance of Ag/Ti 2 AlX (X=C, N) electrical contact materials

Effect of Ni Content on the Microstructure, Performance, and Mechanical Properties of High-Entropy Alloy Nitride (AlCrTiMoVNi)N Coatings Produced by Cathodic Arc Evaporation

Investigation of the Microstructure and Electrical Performance of Ag/SnO 2 In 2 O 3 Contacts with Nickel Addition Fabricated by Internal Oxidation

Influence of Ti 2 SnC content on arc erosion resistance in Ag–Ti 2 SnC composites

Research on Arc Erosion Products on Silver-metal Oxide Contacts Materials

Influence of Ag Contents on Structure and Tribological Properties of TiSiN-Ag Nanocomposite Coatings on Ti–6Al–4V

Influence of Cr on Microstructure and Electrochemical Properties of FeNiMnCuCrx High-entropy Alloy

The influence of surface oxides on the distribution and release of nickel from Nitinol wires

Electrical Contact Characteristics of Ag-SnO2 Materials with Increased SnO2 Content

Effects of Ni content on microstructure and wear behavior of Al–13Si–3Cu–1Mg-xNi-0.6Fe-0.6Mn alloys

Interfacial wettability and electrical properties of Ni-doped Ag/Bi2Sn2O7 electrical contact materials

Effect of preparing method of ZnO powders on electrical arc erosion behavior of Ag/ZnO electrical contact material

The Beauty and the Deed of Silver During Arc Erosion of Ag/Ti3AlC2 Contacts

Effects of Nickel on the Oxide/Metal Interface Morphology and Oxidation Rate During High-Temperature Oxidation of Fe–Cu–Ni Alloys

Influence of Ni on the Organization and Properties of AlCoCrFeMn High-Entropy Alloys by Laser-Sintering Technique

Effect of Ni Content on Microstructure, Mechanical Properties, and Abrasion Behavior of Fe-B-C Alloy

Effect of expelling P content on Ni(P) dissolution and reaction with SnAgCu(Ni)