Abstract:For the aspheric optical surface finished with a doughnut-shaped MCF (magnetic compound fluid) polishing tool, the performance of the polishing tool depends mainly on the properties of the MCF slurry. Therefore, under-standing the effect of each MCF slurry component on the polishing characteristics is crucial to developing novel polishing techniques. In this paper, the polishing principle was depicted and the corresponding polishing jig was constructed with a six-degree-of-freedom manipulator. The conical surfaces, which were considered as special aspheric surfaces, were experimentally polished under proper polishing conditions to examine the effects of the carbonyl iron particles (CIPs) concentration and the sizes of the abrasive particles (APs) on the polishing ability to remove material/tool marks and improve work surface qualities. Theoretical analyses were also performed to gain a more comprehensive understanding of the behaviors of CIPs and APs in the magnetic field. The results were shown as follows: (1) The CIPs concentration affected positively the magnetization of the MCF slurry, leading to better performance in the removal rate of material/tool marks when a higher CIPs concentration of was applied. The best surface quality was attained with a CIPs concentration of 45 wt%. (2) Larger APs were beneficial for obtaining higher removal rates of material/tool marks. The APs with 1 mu m in diameter were preferred for achieving a better surface quality. (3) Ferric clusters were formed along the magnetic line of force and their orientations changed periodically to stir the APs with the magnet revolution. (4) The Aps, at a given working gap, can squeeze the work-surface. The squeezing action was much more intense when larger APs and the MCF slurry with a higher magnetization were employed. (5) The material removal model suggested that the material was removed due to the APs and the relative motion between the work-surface and APs.

Polishing and Local Planarization High-Precision HDC Capsules by Four-Cup-Type Technology for Inertial Confinement Fusion

Model Optimization of Infrared Homogenization for Inertial Confinement Fusion Cryotargets

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Fabrication and Molding of Low Density Divinylbenzene Foams by ICF

Enhanced performance of hollow polystyrene spheres for inertial confined fusion by noncovalent interactions

Surface Polishing of Laser Powder Bed Fused Inconel 625 Surfaces Using Multi-jet Hydrodynamic Cavitation Abrasive Finishing: An Emerging Class of Cleaner Surface Enhancement Process

Ultrafine Polishing of Optical Polymer with Zirconia-Coated Carbonyl-Iron-particle-based Magnetic Compound Fluid Slurry

Analyzing and relieving the thermal issues caused by fabrication details of a deuterium cryogenic target

Fabrication of solid CH-CD multilayer microspheres for inertial confinement fusion

Nano-precision Polishing of CVD SiC Using MCF (magnetic Compound Fluid) Slurry

Recent progress of thick tungsten coating prepared by chemical vapor deposition as the plasma-facing material

High quality hollow diamond shell for inertial confinement fusion

Optimization and mechanism of precise finishing of TC4 alloy by plasma electrolytic polishing

Mechanical property improvement of B4C ceramic hollow microspheres by doping carbon nanotubes at low-temperature

Design and Microfabrication of Cooling Arm for Inertial Confinement Fusion Application

Novel Disc Hydrodynamic Polishing Process and Tool for High-Efficiency Polishing of Ultra-Smooth Surfaces

Processing and characterization of B4C/Cu graded composite as plasma facing component for fusion reactors

Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters

Achieving global thermal uniformity of a compact cylindrical deuterium-tritium target

A new ignition hohlraum design for indirect-drive inertial confinement fusion

Effect of the Components of Magnetic Compound Fluid (MCF) Slurry on Polishing Characteristics in Aspheric-Surface Finishing with the Doughnut-Shaped MCF Tool