Abstract:Hot rolling of steels represents one of the most critical steps to achieve finished products with high surface quality. The increasing productivity added to the rising customer requirements result in more and more severe scheduling rules for the HSM. Strip surface aspect is very important in terms of HSM operation costs and productivity limitation. Among all surface defects, the most crippling comes from the oxide scale formed at the surface of the steel during the hot rolling, at the entry of the finishing mill (last part of the hot strip mill): the secondary scale, mechanical behaviour of which is still poorly known. The secondary scale may fracture under the stresses imposed by the successive rolling passes, and can be embedded in the steel strip surface: this defect is called "rolled-in scale defect". In addition, the extrusion of the subjacent metal inside the oxide cracks induces large local modifications of friction and heat transfer conditions. Consequently, a precise description of oxide scale deformation mechanisms is necessary to better define the boundary conditions in a roll bite and to better understand the initiation mechanisms of rolled-in scale defects. Our scientific objective is then to provide a realistic physical and numerical model to simulate the oxide scale flow in the roll bite and in particular, its damage. After the presentation of the industrial process and the context of this study, the physical and mechanical properties of the oxide scale in the finishing mill are investigated. We introduce the Forge2® finite element software, selected for this study to simulate the oxide scale behaviour in a finishing mill stand. The numerical developments performed to simulate the different kinds of oxide damage are described. Three mechanical tests have been selected to approach the solicitations undergone by the oxide scale at the entry of the roll gap, suspected to be critical for damage: the 4-point hot bending test, the hot tension test and the hot plane strain compression test. A numerical study is performed in parallel. Based on constitutive data obtained from these three mechanical tests, the mechanical description of a rolling stand is sufficient for satisfactory simulation of the industrial process.

On-line monitoring of oxidation states in HSS work rolls during hot rolling using pulsed eddy current testing

Anomalous Evolution of Corrosion Behaviour of Warm-Rolled Type 304 Austenitic Stainless Steel

A novel method for competitive failure behavior and mechanical degradation online monitoring of laser additive work roll under multidimensional damage

Study on the oxidation of stainless steels 304 and 304L in humid air and the friction during hot rolling

Mechanism of Oxidation of Austenitic Stainless Steels under Conditions of Hot Rolling in Steckel Mills

Effect of Extreme Pressure Additives on the Deformation Behavior of Oxide Scale during the Hot Rolling of Ferritic Stainless Steel Strips

Oxide scale characterization of ferritic stainless steel and its deformation and friction in hot rolling

Online Monitoring System Design for Roll Eccentricity in Rolling Mills

FEM simulation of thermo-mechanical stress and thermal fatigue life assessment of high-speed steel work rolls during hot strip rolling process

Design and optimization of cathode for ECM of high-speed steel roll material based on multi-physics field coupling analysis

Influence of Al addition on the grain boundary oxidation of Ultra High Strength Steels during hot coiling

Numerical Simulation of the Eddy Current and Temperature Fields in the Edge Heating Hot Strip Mill

Factors Affecting the Development of Oxide Scales on Austenitic Stainless Steels during Hot Rolling in Steckel Mills

Effects of surface preparation on tribological behaviour of a ferritic stainless steel in hot rolling

The Effect of Long-Time Austenization on the Wear Resistance and Thermal Fatigue Properties of a High-Speed Steel Roll

The effect of oxide scale of stainless steels on friction and surface roughness in hot rolling

Numerical Simulation of Oxide Scales Evolution During Hot Strip Rolling

Experimental study and numerical simulation of iron oxide scales mechanical behavior in hot rolling

Investigation of oxide scale on ferritic stainless steel B445J1M and its tribological effect in hot rolling

Online Partition-Cooling System of Hot-Rolled Electrical Steel for Thermal Roll Profile and Its Industrial Application