Abstract:Imprint lithography is an effective and well-known technique for replication of nano-scale features. Nanoimprint lithography (NIL) manufacturing equipment utilizes a patterning technology that involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. The technology faithfully reproduces patterns with a higher resolution and greater uniformity compared to those produced by photolithography equipment. Additionally, as this technology does not require an array of wide-diameter lenses and the expensive light sources necessary for advanced photolithography equipment, NIL equipment achieves a simpler, more compact design, allowing for multiple units to be clustered together for increased productivity. Previous studies have demonstrated NIL resolution better than 10nm, making the technology suitable for the printing of several generations of critical memory levels with a single mask. In addition, resist is applied only where necessary, thereby eliminating material waste. Given that there are no complicated optics in the imprint system, the reduction in the cost of the tool, when combined with simple single level processing and zero waste leads to a cost model that is very compelling for semiconductor memory applications. Any new lithographic technology to be introduced into manufacturing must deliver either a performance advantage or a cost advantage. Key technical attributes include alignment, overlay and throughput. In previous papers, overlay and throughput results have been reported on test wafers. In this work, we review progress on pattern capability, throughput, mask life and overlay. To minimize distortion and improve overlay, a Drop Pattern Compensation (DPC) method has been implemented to minimize the added overlay distortion terms. In this paper we describe the origins of the out of plane errors, and describe the method used to correct these errors along with some examples. Improvements to both cross matched machine overlay (XMMO) and imprint mix and match overlay (IMMO) are presented.

Industrial Challenges of TiN Hard Mask Wet Removal Process for 14nm Technology Node

High Throughput Wet Etch Solution for BEOL TiN Removal

Total Solutions for 40nm Metal Hard-Mask All-In-One Etch Process

28nm Metal Hard Mask etch process development

Metal hard-mask based AIO etch challenges and solutions

Optimization of Wet strip after Metal Hard Mask All-in-One Etch for metal void reduction and yield improvement

Post Etch Residue Removal and Material Compatibility in BEOL Using Formulated Chemistries

Rapid prototyping of etch test structures for hard mask development using electron beam lithography

Development of a facile block copolymer method for creating hard mask patterns integrated into semiconductor manufacturing

Ion beam processing for critical EUV photomask process steps: mask blank deposition and photomask absorber etch

Fabrication of TiN metal hard masks via very-high-frequency-direct-current superimposed sputtering

Patterning, mask life, throughput and overlay improvements for high volume semiconductor manufacturing using nanoimprint lithography

Wafer level bulk titanium ICP etching using SU8 as an etching mask

Multiple Patterning Bi-Line/tri-line Structure at Limiting Resolution for 7 Nm by Negative Tone Development of ArF Immersion Lithography

The Defect Reduction of Via Opens by the Integration of Inter-Metal-Dielectric Film, Metal Hard Mask, and All-in-One Etch Processes

Optimization Of Thin Metal Layer Etch Process For Hems/Sensor Application

The Effect of Delay Between Dry Etch and Wet Clean Processing Steps on Cleaning of Post-Etch Residues

A Capped Trimming Hard-Mask Patterning Technique For Integration Of Nano-Devices And Conventional Integrated Circuits

Step Coverage and Dry Etching Process Improvement of Amorphous Carbon Hard Mask

Clearing residual resist in nanoimprint lithography by multi-mask

Suppression of Threshold Voltage Variation by TiN Surface Treatment for N-FinFETs with Very Thin Work Function Metal Layers