Abstract:The bidirectional output fiber laser can achieve two laser outputs from a single resonant cavity, which can reduce the volume and cost of high-power fiber laser systems and has good application prospects in the industry. In this work, we demonstrated a bidirectional output fiber laser oscillator structure, and a total output power of 8 kW at the 2 ports × 4 kW level was achieved experimentally for the first time. In order to suppress stimulated Raman scattering (SRS) and transverse mode instability (TMI), the double cladding ytterbium-doped fiber with a core/cladding diameter of 30/400 μm, a pair of matched output coupler fiber Bragg gratings (OCFBG) with a 3 dB bandwidth of 2 nm, and the pump source with wavelength-stabilized 981 nm laser diodes (LDs) were employed. The effect of the coiling method and diameter of the active fiber on the optical-to-optical (O-O) efficiency and TMI threshold were studied intensively. The comparison of laser performance with a unidirectional output oscillator was further exploited, and results indicated that the bidirectional output fiber laser oscillator possessed a higher O-O efficiency and TMI threshold. By optimizing the fiber coiling diameter and coiling method, we finally achieved a total laser output power of 8169 W (3769 W at end A and 4400 W at end B), with an efficiency of 74.6% and beam quality of M 2 A ∼ 2.13, M 2 B ∼ 2.36, while the total output power achieved by unidirectional output structure was only 5805 W with signs of TMI. To the best of our knowledge, it is the highest output power of the bidirectional output fiber laser.

Fiber Laser Module with Brightness Exceeding 10 MW/(cm2 sr)

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High–Power 792 nm Fiber–Coupled Semiconductor Laser

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

1.1-Kw Ytterbium Monolithic Fiber Laser with Assembled End-Pump Scheme to Couple High Brightness Single Emitters

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Development of 10kW Peak-Power Pulsed Single-Mode Fiber Laser

High-power and high-brightness Er:Yb codoped fiber MOPA operating at 1535 nm

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

High-Efficiency Radiation-Balanced Yb-Doped Silica Fiber Laser With 200-mW Output

High-brightness 975-Nm Surface-Emitting Distributed Feedback Laser and Arrays

A 3.5-kW near-single-mode oscillating–amplifying integrated fiber laser

Phosphor-converted laser-diode-based white lighting module with high luminous flux and color rendering index

Fiber-Coupled Rgb Laser Module For Laser Display

3.1 kW monolithic MOPA configuration fibre laser bidirectionally pumped by non-wavelength-stabilized laser diodes

Optimization and demonstration of a bidirectional output linear-cavity fiber laser with a record high power of 2 × 4 kW

Optimization and demonstration of 6 kW oscillating-amplifying integrated fiber laser employing spindle-shaped fiber to suppress SRS and TMI

880 Nm Semiconductor Laser Diode Arrays and Fiber Coupling Module