Abstract:Pumped storage power stations can ensure the safe operation of the grid, as well as utilize clean energy sources to establish a low-carbon, safe, and efficient energy system. As pump turbines, the core components of pumped storage power plants, become more and more popular, the technical requirements for hydraulic design begin to improve year by year. However, when the unit operates far beyond the optimal range, the variable-speed pump turbine can overcome the shortcomings of the fixed-speed unit and solve the problem of unstable operation under partial load. The pressure pulsation of the unit in the pump condition is investigated by numerical simulation, analyzing the hydraulic thrust, and studying the dynamic response characteristics of the runner at a maximum speed of 456.5 rpm. Comparing the pressure pulsation amplitude of various components in the entire flow passage, the highest values of pressure pulsation were found in the runner and vaneless space. The axial hydraulic thrust has a fluctuation range between 174t and 198t and 0t to 40t for radial force. As per the structural analysis, it has been observed that the runner demonstrates uneven patterns in both its axial and radial deformations, with deformation mainly concentrated in radial displacement and stress distribution mainly concentrated on the blades near the crown. The dynamic stress amplitude of the runner at monitoring point S1 (located on the runner blade near the crown) is 37 MPa. This stress has a dominant frequency of 4.8fn, while the monitoring point S2 (located on the runner blade near the band) is 4 MPa, and the dominant frequency is 1.8fn. Using these findings, the design of the variable-speed pump turbine’s runner can be optimized, and the unit’s stable and secure operation can be guided accordingly.

Prediction on the axial water thrust characteristics of pump turbine runner under partial load

Analysis of Inter-blade Vortex and Runner Blades Force of Pump Turbine during Load Rejection Period

Pressure pulsation analysis of runner and draft tube of pump turbine under different working conditions

Analysis of Internal Flow Characteristics of a Startup Pump Turbine at the Lowest Head under No-Load Conditions

Study on the flow characteristic of pump turbine at partial load

Prediction and Analysis of the Axial Force of Pump-Turbine During Load-Rejection Process

Numerical simulation of the unstable flow phenomenon in a pump turbine at the load rejection conditions in turbine mode

Investigation on the fluctuation of hydraulic exciting force on a pump-turbine runner during the load rejection process

The Influence of Hydraulic Characteristics on Structural Performance in a Pump-Turbine under No-Load Conditions

Analysis of the Flow Behavior and Pressure Fluctuation of a Pump Turbine with Splitter Blades in Part-Load Pump Mode

Pressure Fluctuation Propagation of a Pump Turbine at Pump Mode under Low Head Condition

Numerical Analysis on the Hydraulic Thrust and Dynamic Response Characteristics of a Turbine Pump

Analysis of Flow and Runner Dynamic Response Characteristics under Pump Conditions of Variable-Speed Pump Turbine

Investigation of the Starting-Up Axial Hydraulic Force and Structure Characteristics of Pump Turbine in Pump Mode

Analysis of Dynamic Stresses of Pump-Turbine Runner During Load Rejection Process in Turbine Mode

Analysis of Flow Characteristics of a Pump Turbine under the Transient Condition of 75% Load Rejection

Performance Prediction and Flow Analysis in the Vaned Distributor of A Pump Turbine under Low Flow Rate in Pump Mode

Numerical Simulation Of The Unsteady Flow In A High-Head Pump Turbine And The Runner Improvement

Unsteady Flow Analysis of Pump Mode Small Discharge Condition for a Francis Pump-turbine

Numerical Predictions of Pressure Fluctuations in a Model Pump Turbine with Small Guide Vane Opening based on Partial Averaged Navier Stokes Approach

Instability Study Of A Pump-Turbine At No Load Opening Based On (V(2))Over Bar - F Turbulence Model