Abstract:As the core equipment of pumped storage power station, the reversible Pump-Turbine can switch different working modes frequently during operation. It is prone to have an S-shaped characteristic region, and it will greatly affect the performance of the energy storage unit. Therefore, in order to explore the reasons for the occurrence of the S-shaped characteristic region, this paper takes the model reversible Pump-Turbine as the research object. Firstly, the unit speed-unit flow characteristics are compared with the model test results at different operating conditions. Then, the vortex distribution in the flow channel of the unit is analyzed based on the Omega vortex identification method, and compared with the Q criterion of the second-generation vortex identification method. By analyzing the internal flow characteristics of the S-shaped characteristic region under different guide vane openings, the internal flow law of the S-shaped characteristic region is revealed. It is found that the vortex distribution is less and more uniform under the condition of the turbine, and the distribution of strong and weak vortex is not obvious. Under the runaway condition, there is a pressure mutation zone at the outlet edge of the guide vane and the inlet edge of the runner, and there is a circulation with large radial velocity. The flow direction and size of the water flow change sharply with the rotation of the blade, and it is easy to form a vortex to hinder the flow of the water flow. Under the braking condition, due to the sudden change of radial velocity, there is an unstable vortex between the guide vane cascades, and it is easy to cause serious blockage between the guide vane cascades. The vortex at the leading edge and trailing edge of the blade is relatively large, and it is most obvious in the middle section of the guide vane and the runner blade. Under the condition of reverse pump, the flow velocity in the runner is relatively small, and there is a serious flow separation phenomenon. A large annular flow is formed in the vaneless zone between the guide vane and the runner. Due to the change of pressure, the unstable vortex almost occupies the whole flow channel, and it is easy to cause the pressure fluctuation of the unit and even the damage of the runner. It is necessary to avoid the long-term operation of the reversible Pump-Turbine in this area. The research results can provide a theoretical basis for improving the performance of pumped storage units.

Analysis of Inter-blade Vortex and Runner Blades Force of Pump Turbine during Load Rejection Period

Pressure pulsation analysis of runner and draft tube of pump turbine under different working conditions

Energy Analysis in a Pump-Turbine During the Load Rejection Process

Analysis of Flow Characteristics of a Pump Turbine under the Transient Condition of 75% Load Rejection

Analysis of the Flow Behavior and Pressure Fluctuation of a Pump Turbine with Splitter Blades in Part-Load Pump Mode

Numerical simulation of the unstable flow phenomenon in a pump turbine at the load rejection conditions in turbine mode

Analysis of Vortex Evolution in the Runner Area of Water Pump Turbine under Runaway Conditions

Prediction and Analysis of the Axial Force of Pump-Turbine During Load-Rejection Process

Analysis of vortex characteristics in the S-shaped region of a reversible Pump-Turbine with different guide vane openings based on Omega vortex identification method

Dynamic Characteristics of Load Rejection Process in a Reversible Pump-Turbine

Dynamic Instability of a Pump-Turbine in Load Rejection Transient Process

Improving internal fluid stability of pump turbine in load rejection process by co-adjusting inlet valve and guide vane

Analysis of Dynamic Performance in a Pump-Turbine During the Successive Load Rejection

Numerical Simulation of the Transient Flow in a Pump-Turbine During the Load Rejection Process With Special Emphasis on the Cavitation Effect

Numerical Investigation on the Unstable Flow and Its Interaction with the Hump Characteristic in a Pump Turbine at Pump Mode

Energy loss analysis of transition simulation for a prototype reversible pump turbine during load rejection process

The vortex dynamics characteristics in a pump-turbine: A rigid vorticity analysis while varying guide vane openings in turbine mode

Three dimensional flow simulation of load rejection of a prototype pump-turbine

Analysis of Flow and Runner Dynamic Response Characteristics under Pump Conditions of Variable-Speed Pump Turbine

Evolution and influence of pump-turbine cavitation during load rejection transients of a pumped-storage plant

Analysis of Internal Flow Characteristics of a Startup Pump Turbine at the Lowest Head under No-Load Conditions