Abstract:Hydropower has been the leading renewable source and cheapest ways to generate electrical energy in the world. In recent years, there has been a major upsurge in the hydropower development because of the use of pump as turbine (PAT). However, the operational reliability of a PAT is greatly affected by the unsteady flow fields; therefore, it is important to examine the unsteady flow behavior which can be used as a reference to reduce the noise, vibration, and cavitation performance for centrifugal pumps working as turbines. Thus, the objective of this study was to evaluate the unsteady flow fields by analyzing the distribution of the pressure pulsations using both numerical and experimental measurements in a PAT operating in pump mode. Firstly, the three‐dimensional (3D) unsteady flow equations were solved using SST <i>k‐</i>ω turbulence model during the numerical calculations. Secondly, the numerical results of the hydraulic pump performance were validated by the experimental measurements for numerical accuracy. Lastly, pressure transducers are positioned at certain monitoring points to measure the pressure in the PAT investigated. The numerical and experimental results show that the main frequency of the pressure pulsation is equal to the blade frequency, and as it deviates from the design operating condition, the magnitude of pressure pulsation intensifies. Furthermore, the impeller eye marked the lowest pressure coefficients especially at the design condition and makes it highly susceptible to cavitation. High pressure coefficients were obviously seen at the pressure side on the blade surface closer to the trailing edge at all studied operating conditions. Meanwhile, the rotor‐stator interaction generated the highest pressure pulsation distribution at the volute tongue. Thus, modification of the volute tongue is an optimal approach of reducing the pressure pulsation intensity in the volute and pump as a whole.

Analysis of Flow Characteristics of a Pump Turbine under the Transient Condition of 75% Load Rejection

Analysis of Inter-blade Vortex and Runner Blades Force of Pump Turbine during Load Rejection Period

Pressure pulsation analysis of runner and draft tube of pump turbine under different working conditions

Pressure pulsation in small opening operating mode of pump turbine’s turbine mode

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Analysis of Dynamic Performance in a Pump-Turbine During the Successive Load Rejection

Three dimensional flow simulation of load rejection of a prototype pump-turbine

Study on the flow characteristic of pump turbine at partial load

Numerical simulation of the unstable flow phenomenon in a pump turbine at the load rejection conditions in turbine mode

Study On Transient Hydrodynamic Performance And Cavitation Characteristic Of High-Speed Mixed-Flow Pump

Analysis of Internal Flow Characteristics of a Startup Pump Turbine at the Lowest Head under No-Load Conditions

Energy loss analysis of transition simulation for a prototype reversible pump turbine during load rejection process

Study on Transient Flow Characteristics of Pump Turbines During No-Load Condition in Turbine Mode Startup

Fluid–Structure Coupling Analysis of the Stationary Structures of a Prototype Pump Turbine during Load Rejection

Flow-Induced Dynamic Behavior of Head-Cover Bolts in a Prototype Pump-Turbine During Load Rejection

Analysis of the Flow Energy Loss and Q-H Stability in Reversible Pump Turbine as Pump with Different Guide Vane Opening Angles

Prediction and Analysis of the Axial Force of Pump-Turbine During Load-Rejection Process

Mechanism of low frequency high amplitude pressure fluctuation in a pump-turbine during the load rejection process

Analysis of Flow and Runner Dynamic Response Characteristics under Pump Conditions of Variable-Speed Pump Turbine

Numerical Simulation of Flow Characteristics of Pump Turbine with Small Guide Vanes Opening

Evolution and influence of pump-turbine cavitation during load rejection transients of a pumped-storage plant