Abstract:Selective laser melting (SLM) technology is promising to fabricate complex-shaped metal components, especially light-weight aluminum (Al) alloy. Facing the grow requirement of thermal stability for applications in aviation and aerospace at high temperatures, the poor thermal stability of Al alloy needs to be improved. Thus, in this study, we developed a novel heat-resistant eutectic Al-Fe-Ni alloy which is suitable for the SLM process. Firstly, the composition of Al-1.75Fe-1.25Ni (wt%) alloy was designed and confirmed through the calculation of hot crack susceptibility index |dT/d(fs0.5)| and the analysis of the as-cast microstructure. Then, the designed alloy was fabricated using the optimized SLM processing parameters. Finally, the effects of heat treatment on microstructure evolution and phase stability during thermal exposure were investigated. Results show that the SLMed alloy is consisted of α-Al and cellular eutectic Al9FeNi phases. The fine grain structure and nano-sized Al9FeNi phase of the SLMed sample result in high hardness which is more than twice higher than that of the as-cast sample. During long-term thermal exposure at 300 °C, the fine grain structure and cellular eutectic phase remain almost unchanged, and thus, the hardness of the alloy can be kept stable. When the exposure temperature further increased, the fine grains gradually grew up and the cellular Al9FeNi phases were gradually collapsed and coarsened. Heat treatment at such high temperature (above 400 °C) resulted in microstructure coarsening and formation of large-sized rod-like or spherical phases, which significantly degraded the hardness. The novel heat-resistant Al-Fe-Ni alloy together with the alloy composition design method provides new insight into light-weight and complex-shaped components produced by the SLM process for high-temperature applications.

Ultra-fine-grained and gradient FeCrAl alloys with outstanding work hardening capability

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Fabrication of ultrafine grained FeCrAl-0.6 wt.% ZrC alloys with enhanced mechanical properties by spark plasma sintering

Deformation mechanism in nanolaminate FeCrAl alloys by in situ micromechanical strain rate jump tests at elevated temperatures

Enhancing the ductility in the age-hardened aluminum alloy using a gradient nanostructured structure

Microstructure, strength and irradiation response of an ultra-fine grained FeNiCoCr multi-principal element alloy

Alloy Design and Development of High Cr Containing FeCrAl Ferritic Alloys for Extreme Environments

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys

Influence of Cold-Rolling Reduction on Microstructure and Tensile Properties of Nuclear FeCrAl Alloy with Low Cr and Nb Contents

High‐Temperature Mechanical Behavior of Single‐Crystal FeCrAl Alloy Under In Situ Micropillar Compression

Experiments and Modeling of the Macroscale Mechanical Responses of Neutron-Irradiated FeCrAl Alloys

Enhanced strength-ductility combination by introducing bimodal grains structures in high-density oxide dispersion strengthened FeCrAl alloys fabricated by spark plasma sintering technology

Designing a gradient structure in a Ni-based superalloy to improve fretting fatigue resistance at elevated temperatures through an ultrasonic surface rolling process

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Modification and refinement of Fe-containing phases, mechanical properties and strengthening mechanisms in Al–Fe alloys via Cr alloying and continuous rheo-extrusion

Mechanical property and strengthening mechanism of ZrC nanoparticle dispersion-strengthened Mo containing FeCrAl alloys

Dually-refined grain and precipitate microstructure of ATF-FeCrAl alloy by a two-step annealing process to separate the recrystallization from precipitation

Graded Microstructure and Mechanical Properties of Spark Plasma Sintered Fe-Cr alloys

High-strength and tunable plasticity in sputtered Al–Cr alloys with multistage phase transformations

Strain hardening behavior and microstructure evolution of gradient-structured Cu-Al alloys with low stack fault energy

Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting