Abstract:The Fe-13Cr-4Al alloy has become a promising candidate material for accident tolerance fuel (ATF) cladding of light-water reactors (LWRs) due to its excellent oxidation resistance to high-temperature water vapor. However, the tensile deformation behavior of the Fe-13Cr-4Al alloy under different strain rates at different temperatures is still unclear. In the present study, the tensile behavior and deformed microstructure of the Fe-13Cr-4Al alloy were investigated at strain rates from 5 × 10–4 to 1 × 10–2 s−1 in the temperature range from RT to 600 °C. Serrations were observed in the tensile engineering stress–strain curves of the intermediate temperature ranging from 300 to 450 °C at all the three strain rates, indicating the occurrence of dynamic strain aging (DSA). As the strain rate increased, the temperature range where serrated plastic flow occurred shifted to the high temperature regime. Serrated plastic flow occurred after a certain critical plastic strain, and the critical plastic strain decreased with the increase in temperature and increased with the increase in strain rate. In the DSA regime of the Fe-13Cr-4Al alloy, the plateau in the yield strength, ductility minima, negative strain rate sensitivity, the peaks of strain hardening exponent and work hardening rate were observed, which were the typical manifestations of the DSA. The activation energies of serrated plastic flow evaluated by three different methods were 157 ± 35, 92 ± 10 and 93 ± 10 kJ/mol, respectively. According to the values of activation energy, the controlling mechanism responsible for the DSA of the Fe-13Cr-4Al alloy was found to be the interaction between substitutional aluminum atoms and dislocations. The fracture surfaces of the specimens tested at 400 °C under three strain rates showed the mixed fracture mode, which contained dimples and cleavage facets. The tensile samples at 600 °C showed a completely ductile fracture mode with large and deep dimples. A large number of dislocation tangles in the microstructure of the specimens tested at 400 °C under all the strain rates were observed, with a large amount of Fe2Nb Laves particles along the grain boundaries and in the matrix. Dislocation pile-up was also observed around the grain boundaries and second-phase particles. With the increase in the strain rate, the number of subgrains increased, and a clear dislocation cell structure was also observed.

High‐Temperature Mechanical Behavior of Single‐Crystal FeCrAl Alloy Under In Situ Micropillar Compression

Deformation mechanism in nanolaminate FeCrAl alloys by in situ micromechanical strain rate jump tests at elevated temperatures

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Molecular Dynamics Study on Tensile Mechanical Properties of FeCrAl Alloy

Dynamic recrystallization-induced temperature insensitivity of yield stress in single-crystal Al 1.2 CrFeCoNi micropillars

Molecular dynamics simulation of tensile deformation behavior of single-crystal Fe–Cr–Al before and after irradiation

Dynamic strain aging behavior of accident tolerance fuel cladding FeCrAl-based alloy for advanced nuclear energy

Structural Evolution and Transitions of Mechanisms in Creep Deformation of Nanocrystalline FeCrAl Alloys.

Ultra-fine-grained and gradient FeCrAl alloys with outstanding work hardening capability

Role of loading direction on high-temperature tensile behavior of Fe-13Cr-4Al-2Mo-0.65Nb alloy

Mechanical property and strengthening mechanism of ZrC nanoparticle dispersion-strengthened Mo containing FeCrAl alloys

Deformation mechanisms of Al0.1CoCrFeNi at elevated temperatures

Defective structures in FeCrAl alloys from first principles calculations

Fabrication of ultrafine grained FeCrAl-0.6 wt.% ZrC alloys with enhanced mechanical properties by spark plasma sintering

High Temperature Tensile and Compressive Behaviors of Nanostructured Polycrystalline AlCoCrFeNi High Entropy Alloy: A Molecular Dynamics Study

Anomalous Increase of Fracture Toughness of TiAl-based Alloys at High Temperature

Experiments and Modeling of the Macroscale Mechanical Responses of Neutron-Irradiated FeCrAl Alloys

The effect of grain boundaries and precipitates on the mechanical behavior of the refractory compositionally complex alloy NbMoCrTiAl

Study on High Temperature Mechanical Behavior and Microstructure Evolution of Ni3Al-based Superalloy JG4246A

Atomic-scale Investigation of Creep Behavior and Deformation Mechanism in Nanocrystalline FeCrAl Alloys

Investigation of In Situ 1150 ℃ High Temperature Deformation Behavior and Fracture Mechanism of a Second Generation Single Crystal Superalloy