Abstract:Grain boundary (GB) strengthening of metallic materials faces limitations as grain sizes are reduced to the nanoscale, primarily due to the transition from the strengthening to the softening effects. Understanding the intrinsic mechanisms behind such pronounced transitions is essential for optimizing the mechanical properties of nanocrystalline (NC) alloys. In this work, the critical grain size responsible for this transition is determined for NC CoCrNi medium-entropy alloys using molecular dynamics simulation, and the underlying mechanisms concerning varying temperatures and strain rates are systematically investigated for the samples with the critical grain size. The transition from Hall-Petch (HP) strengthening to Inverse Hall-Petch (IHP) softening is established by decreasing the average grain sizes from 21 nm to 3 nm. The critical grain size for the current alloys is estimated to be 12 nm, and the underlying deformation mechanisms are illustrated as follows: In the IHP regime, GB-mediated deformation becomes dominant, leading to softening. Conversely, in the HP regime, dislocation slip dominates the deformation mode, contributing to strengthening. It is found that an increase in temperature from 77 K to 1100 K leads to a decrease in the average flow stress and Young's modulus. Meanwhile, the deformation mechanisms change from dislocation slip (77K-700K) to GB-mediated deformation (700 K-1100 K). Furthermore, the underlying mechanisms correlating to the critical strain rate are uncovered. It can be attributed to the shift in deformation mechanisms from dislocation slip at relatively low strain rate regimes (5 x 10(7) s(-1)-2 x 10(9) s(-1)) to dislocation drag at relatively high strain rate regimes (2 x 10(9) s(-1)-5 x 10(9) s(-1)). Our atomistic insights into the tensile response of NC CoCrNi may provide a crucial basis for designing superior properties to meet the growing demands of advanced engineering fields.

The effect of grain boundaries and precipitates on the mechanical behavior of the refractory compositionally complex alloy NbMoCrTiAl

Microstructure and properties of Nb-Cr based multi-element alloy

Microstructure and ambient mechanical properties of Nb-Ti-Cr-Si based ultrahigh temperature alloy by consumable arc melting

Compositional Effect on Microstructure and Mechanical Properties of AlNbTiZr-based Refractory High Entropy Alloys

Microstructural stability and mechanical properties of BCC-based Fe3.5Cr1.5NiAl0.8 multicomponent alloy

Deformation mechanisms and their role in the lack of ductility in the refractory-based high entropy alloy AlMo0.5NbTa0.5TiZr

Microstructure Formation and Elevated Temperature Mechanical Properties of Directionally Solidified Ti44Al6Nb1Cr Alloy

Effect of Microstructure on Mechanical Behavior of Ti-Al-Cr-Nb Alloy

Role of Local FCC Structure to the BCC Polycrystalline NbMoTaWV High‐Entropy Refractory Alloy under Plastic Deformation

Fractal Analysis of Mo and Nb Effects on Grain Boundary Character and Hot Cracking Behavior for Ni-Cr-Fe Alloys

Effect of Grain Size, Temperature, and Tensile Strain Rate on Mechanical Response of CoCrNi Medium-Entropy Alloys

Primary Slip Induced Band-Like Structures and the Associated Recrystallization Kinetics in Ti2AlNb Alloy with Centimeter-Grade Coarse Grains

Effect of Cr Incorporation on the Mechanical Properties of HfMoTiZrCr, HfMoNbZrCr, and HfMoNbTiCr Refractory High-Entropy Alloys

Inhibiting Grain Boundary Cracking in Laser Additively-Manufactured MoNbTaVTiCu Refractory Complex Concentrated Alloys by Tuning the Cu/Ti Content

Microstructure and Mechanical Properties of Lightweight Ti3Zr1.5NbVAlx (x=0, 0.25, 0.5 and 0.75) Refractory Complex Concentrated Alloys

Effect of alloy composition on microstructure and high temperature properties of Nb–Zr–C ternary alloys

Novel as-cast Ti-rich refractory complex concentrated alloys with superior tensile properties

Micromechanisms of Deformation and Fracture in a Ti3Al-Nb Alloy

Mechanical Behaviors of Nial-Cr(Mo)-Based Near Eutectic Alloy with Ti, Hf, Nb and W Additions

Formation of coherent BCC/B2 microstructure and mechanical properties of Al–Ti–Zr–Nb–Ta–Cr/Mo light-weight refractory high-entropy alloys

Microstructure and mechanical properties of lightweight Al<i><sub>x</sub></i>CrNbTiV(<i>x</i>=0.2, 0.5, 0.8) refractory high entropy alloys