Abstract:Abstract Several high-temperature body-centered cubic (bcc) structural materials such as Nb-, Zr- and Ti-based alloys undergo phase separation, which is a second-order phase transformation, whereby the host lattice decomposes into distinct bcc domains with different compositions. Using atomistic simulations, we studied the high-strain-rate response of bcc-forming Nb– x Zr ( x = 0, 25, 50 at.%) alloys. To induce phase separation in our starter alloy, we first employed hybrid Monte Carlo/Molecular Dynamics simulations in single crystals of Nb– x Zr at 1000 K. Subsequently, these crystals were deformed along different crystallographic orientations ( $$\langle 001\rangle$$ ⟨ 001 ⟩ , $$\langle 110\rangle$$ ⟨ 110 ⟩ and $$\langle 111\rangle$$ ⟨ 111 ⟩ ) at a strain rate of $$10^{+8} s^{-1}$$ 10 + 8 s - 1 , to investigate orientation dependent mechanical response. The phase-separated Nb– x Zr microstructures exhibited distinct bcc domains enriched in either Zr or Nb. Notably, Nb-50 at.%Zr contained coarser Zr-domains compared to Nb-25 at.%Zr. The Zr-rich domains acted as “soft” inclusions, resulting in reduced peak strengths in the following order: pure Nb (Nb-0 at.%Zr) > Nb-25 at.%Zr > Nb-50 at.%Zr. This implies that phase separation causes softening in Nb– x Zr. We also discovered two deformation pathways that depended on the crystallographic orientation: (i) For deformation along $$\langle 110\rangle$$ ⟨ 110 ⟩ and $$\langle 111\rangle$$ ⟨ 111 ⟩ directions: Elastic deformation was followed by dislocation plasticity on $$\{110\}\langle 111\rangle$$ { 110 } ⟨ 111 ⟩ slip systems; and (ii) For deformation along $$\langle 001\rangle$$ ⟨ 001 ⟩ direction: Elastic deformation was followed by the formation of a volumetric fcc structure, twinning on {112} $$\langle 111\rangle$$ ⟨ 111 ⟩ system, and the formation fcc-phase at the twin/matrix interfacial regions. This was ultimately accompanied by dislocation plasticity on $$\{110\}\langle 111\rangle$$ { 110 } ⟨ 111 ⟩ slip system. The bcc $$\rightarrow$$ → fcc displacive transformation facilitated {112} $$\langle 111\rangle$$ ⟨ 111 ⟩ twinning when Nb– x Zr was deformed along $$\langle 001\rangle$$ ⟨ 001 ⟩ . Our investigation shows that softening of bcc alloys can result from a coupling of mechanisms involving local solute segregation, displacive phase transformation and twinning occurring across multiple slip planes.

Deformation mechanisms and their role in the lack of ductility in the refractory-based high entropy alloy AlMo0.5NbTa0.5TiZr

Compositional Effect on Microstructure and Mechanical Properties of AlNbTiZr-based Refractory High Entropy Alloys

Phase Stability and Microstructural Evolution in a Ductile Refractory High Entropy Alloy Al 10 Nb 15 Ta 5 Ti 30 Zr 40

Temperature dependent deformation behavior and strengthening mechanisms in a low density refractory high entropy alloy Al10Nb15Ta5Ti30Zr40

Mechanical Properties of the Al3(TiTaZrNbHf) High Entropy Intermetallic Compound: A Molecular Dynamic Study

Ductile and brittle crack-tip response in equimolar refractory high-entropy alloys

The effect of grain boundaries and precipitates on the mechanical behavior of the refractory compositionally complex alloy NbMoCrTiAl

Micromechanisms of Deformation and Fracture in a Ti3Al-Nb Alloy

Influence of Multiphase Microstructure on the Strength and Ductility of Nb-Zr-Ti-V Refractory High Entropy Alloys

Mechanical instability and tensile properties of TiZrHfNbTa high entropy alloy at cryogenic temperatures

Insights into orientation-dependent plasticity deformation of HfNbTaTiZr refractory high entropy alloy: An atomistic investigation

Transformation- and twinning-induced plasticity in phase-separated bcc Nb-Zr alloys: an atomistic study

Theoretical Investigation of the Phase Stability and Elastic Properties of TiZrHfNb-based High Entropy Alloys

The Stability of Thermodynamically Metastable Phases in a Zr-Sn-Nb-Mo Alloy: Effects of Alloying Elements, Morphology and Applied Stress/strain

Edge Dislocations Can Control Yield Strength in Refractory Body-Centered-Cubic High Entropy Alloys

On the Mechanism of Plastic Deformation in Metastable TiZrHfNbx Refractory High Entropy Alloys During Tensile and Sliding Friction at 500 °C

Influence of tantalum composition on mechanical behavior and deformation mechanisms of TiZrHfTax high entropy alloys

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature

Interrupted in-situ EBSD study of crystallographic characteristics and deformation micro-mechanism in TiZrHfNbx refractory high entropy alloys during uniaxial tensile deformation

The evolution of compositional and microstructural heterogeneities in a TaMo0.5ZrTi1.5Al0.1Si0.2 high entropy alloy

Microstructures and Mechanical Properties of Al-Ti-Zr-Nb-Ta-Mo-V Refractory High-Entropy Alloys with Coherent B2 Nanoprecipitation