Abstract:The study reported a novel L1 2 -strengthening NiCoCrAlTi high-entropy alloy (HEA) with an outstanding synergy of tensile strength and ductility at both ambient and high temperatures. The HEA was prepared by arc melting and cold-rolling, followed by isothermal aging at designed precipitation temperatures to achieve coexistence of recrystallized and non-recrystallized grains. Transmission electron microscopy (TEM) characterization revealed a high density of rod-like and spheroidal L1 2 precipitates distributing in the micro/nanograins and non-recrystallized regions in the annealed specimens. The yield stress, ultimate tensile stress, and ductility of the HEA were ∼1300 MPa, 1610 MPa, and 14 % at room temperature, respectively. Such excellent mechanical properties of ∼1060 MPa, 1271 MPa, and 25 % were maintained to 600 °C, which was superior to most reported HEAs and Co- and Ni-based superalloys to date. Systematic TEM analysis unveiled at low strain, the deformation mechanism was mainly controlled by dislocations and stacking faults (SFs). With the increase in strain, the deformation mode gradually transferred to dislocations, deformation twins (DTs), and SFs. Moreover, the complex interaction between SFs and L1 2 precipitates, including the shearing and blocking effects, was frequently observed, contributing to the high tensile strength. Thus, the extremely high tensile strength and sustained ductility at 600 °C mainly originate from the cooperation among interaction between L1 2 precipitation and dislocations and extensive SFs, DTs, immobile Lomer-Cottrell (L-C) locks formed from interactions between SFs and SFs/DTs, hierarchical SFs/DTs networks, as well as hetero-deformation-induced strengthening. Such a unique deformation mechanism breaks the strength-ductility trade-off of the HEA at high temperatures.

Ultrahigh intermediate-temperature strength and good tensile plasticity in chemically complex intermetallic alloys via lamellar architectures

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Heterogeneous Lamella Design to Tune the Mechanical Behaviour of a New Cost-Effective Compositionally Complicated Alloy

Ultrastrong interstitially-strengthened chemically complex martensite via tuning phase stability

Strength-ductility materials by engineering coherent interface at incoherent precipitates

Hierarchically heterogeneous strategy for Ti 2 AlC/TiAl composite with superior mechanical properties

Plastic Deformation Behaviors and Mechanical Properties of Advanced Single Crystalline CoNi-base Superalloys

Multiscale crack deflection overcomes intermediate-temperature brittleness via hierarchical fiber-like structure in a dual nanoprecipitation-strengthened high-entropy alloy fabricated by selective laser melting

Electron beam powder bed fusion enables crack-free, high-strength and sufficiently ductile chemically complex intermetallic alloys

Novel as-cast Ti-rich refractory complex concentrated alloys with superior tensile properties

A promising high temperature self-lubricating Cu-based superalloy with coherent cuboidal L12-γʹ phases

Temperature-Dependent Mechanical Behaviors and Deformation Mechanisms in a Si-Added Medium-Entropy Superalloy with L12 Precipitation

Hierarchically ordered coherent interfaces-driven ultrahigh specific-strength and toughness in a nano-martensite titanium alloy

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Diffusion-controlled Alloying of Single-phase Multi-principal Covalent Transition Metal Carbides with Enhanced Damage tolerance and Exceptional Thermal Properties

Magnificent tensile strength and ductility synergy in a NiCoCrAlTi high-entropy alloy at elevated temperature

L1 2 ‐Strengthened Co‐Rich Alloys for High‐Temperature Structural Applications: A Critical Review

The effect of grain boundaries and precipitates on the mechanical behavior of the refractory compositionally complex alloy NbMoCrTiAl

Tailoring nanoprecipitates to achieve ultrahigh strength (CoCrNi)94.5W3Ta2.5 medium-entropy alloys

Overcoming high-temperature strength-ductility trade-off by combination deformation twinning of C11b and D022 superlattices in a Ni-Cr-W/Mo-based superalloy

Microstructure and mechanical properties of a new Ni–Co based superalloy at intermediate temperatures