Abstract:Additive manufacturing (AM) is a highly promising technique for producing near-net-shape high-value aerospace components with intricate geometries. However, due to the susceptibility to hot cracking, high-volume-fraction Ni 3 (Al,Ti)-type precipitation-strengthened Ni-base superalloys typically used for these applications are usually difficult or even infeasible to manufacture via AM. Previous metallurgical methods to mitigate hot-cracking in AM usually compromise strength, resulting in a trade-off between hot-cracking resistance and strength. Here, we overcome this trade-off in AM of a multicomponent Ni-rich precipitation-strengthened high-entropy alloy (MNiHEA) Ni 46.23 Co 23 Cr 10 Fe 5 Al 8.5 Ti 4 W 2 Mo 1 C 0.15 B 0.1 Zr 0.02 (at%): synergizing remarkable hot-cracking resistance and ultrahigh strength. Crack-free MNiHEA is successfully fabricated via laser powder bed fusion (LPBF) without preheating, despite its high (Al+Ti) content of ∼7.4 wt%. This remarkable resistance to hot cracking arises from the comparatively low critical solidification range, the small average solidification cracking index, the suppression of the intermetallic phases in solidification, and the moderate hardening rate induced by the nanoprecipitates in aging, which are intrinsically imparted by thermodynamic and mechanical characteristics. The yield strength of the as-built-to-aged MNiHEA reaches ∼1.2 gigapascal, together with acceptable ductility. This ultrahigh strength outperforms its cast-to-aged counterpart by more than one-third and existing commercial superalloys CM247 and IN738LC. Such pronounced enhancement in strength is attained through multiple strengthening mechanisms, including solid-solution hardening, dislocation hardening, precipitation-hardening and grain-boundary strengthening. Our results demonstrate that intrinsic hot-cracking resistance can be utilized as a new metallurgical concept for mitigating hot-cracking without compromising strength in AM of high-temperature materials such as HEAs and superalloys.

Multiscale crack deflection overcomes intermediate-temperature brittleness via hierarchical fiber-like structure in a dual nanoprecipitation-strengthened high-entropy alloy fabricated by selective laser melting

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

A precipitation strengthened high entropy alloy with high (Al+Ti) content for laser powder bed fusion: Synergizing in trinsic hot cracking resistance and ultrahigh strength

Compositional regulation in additive manufacturing of precipitation-hardening (CoCrNi) 94 Ti 3 Al 3 medium-entropy superalloy: cellular structure stabilization and strength enhancement

Hierarchically heterogeneous microstructure enables ultrahigh-strength and good ductility in selective laser melted eutectic high-entropy alloys

Tailored microstructures and strengthening mechanisms in an additively manufactured dual-phase high-entropy alloy via selective laser melting

Deformation mechanisms in an additively manufactured dual-phase eutectic high-entropy alloy

Displacive transformation as pathway to prevent micro-cracks induced by thermal stress in additively manufactured strong and ductile high-entropy alloys

Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy

Multi-scale annealing twins generate superior ductility in an additively manufactured high-strength medium entropy alloy

Simultaneously Enhanced Strength-Ductility of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Via Additive Manufacturing

Extraordinary superplasticity at low homologous temperature and high strain rate enabled by a multiphase nanocrystalline network

Additively manufactured heterogeneous precipitation-strengthened high-entropy alloys with high strength and ductility

Simultaneous enhancement of strength and ductility via microband formation and nanotwinning in an L12-strengthened alloy

Selective laser melting of AlCoCrFeMnNi high entropy alloy: Effect of heat treatment

Strength-ductility synergy of an additively manufactured metastable high-entropy alloy achieved by transformation-induced plasticity strengthening

Symbiotically engineered crystalline-amorphous nanostructure in a strong-yet-stable Al alloy with large twinning-induced plasticity

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Microstructural origins of enhanced work hardening and ductility in laser powder-bed fusion 3D-printed AlCoCrFeNi 2.1 eutectic high-entropy alloys

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Strengthening and fracture mechanisms of a precipitation hardening high-entropy alloy fabricated by selective laser melting