Abstract:The Fe-13Cr-4Al alloy has become a promising candidate material for accident tolerance fuel (ATF) cladding of light-water reactors (LWRs) due to its excellent oxidation resistance to high-temperature water vapor. However, the tensile deformation behavior of the Fe-13Cr-4Al alloy under different strain rates at different temperatures is still unclear. In the present study, the tensile behavior and deformed microstructure of the Fe-13Cr-4Al alloy were investigated at strain rates from 5 × 10–4 to 1 × 10–2 s−1 in the temperature range from RT to 600 °C. Serrations were observed in the tensile engineering stress–strain curves of the intermediate temperature ranging from 300 to 450 °C at all the three strain rates, indicating the occurrence of dynamic strain aging (DSA). As the strain rate increased, the temperature range where serrated plastic flow occurred shifted to the high temperature regime. Serrated plastic flow occurred after a certain critical plastic strain, and the critical plastic strain decreased with the increase in temperature and increased with the increase in strain rate. In the DSA regime of the Fe-13Cr-4Al alloy, the plateau in the yield strength, ductility minima, negative strain rate sensitivity, the peaks of strain hardening exponent and work hardening rate were observed, which were the typical manifestations of the DSA. The activation energies of serrated plastic flow evaluated by three different methods were 157 ± 35, 92 ± 10 and 93 ± 10 kJ/mol, respectively. According to the values of activation energy, the controlling mechanism responsible for the DSA of the Fe-13Cr-4Al alloy was found to be the interaction between substitutional aluminum atoms and dislocations. The fracture surfaces of the specimens tested at 400 °C under three strain rates showed the mixed fracture mode, which contained dimples and cleavage facets. The tensile samples at 600 °C showed a completely ductile fracture mode with large and deep dimples. A large number of dislocation tangles in the microstructure of the specimens tested at 400 °C under all the strain rates were observed, with a large amount of Fe2Nb Laves particles along the grain boundaries and in the matrix. Dislocation pile-up was also observed around the grain boundaries and second-phase particles. With the increase in the strain rate, the number of subgrains increased, and a clear dislocation cell structure was also observed.

Deformation mechanism in nanolaminate FeCrAl alloys by in situ micromechanical strain rate jump tests at elevated temperatures

Structural Evolution and Transitions of Mechanisms in Creep Deformation of Nanocrystalline FeCrAl Alloys.

High‐Temperature Mechanical Behavior of Single‐Crystal FeCrAl Alloy Under In Situ Micropillar Compression

Molecular Dynamics Study on Tensile Mechanical Properties of FeCrAl Alloy

Atomic-scale Investigation of Creep Behavior and Deformation Mechanism in Nanocrystalline FeCrAl Alloys

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Molecular dynamics simulation of tensile deformation behavior of single-crystal Fe–Cr–Al before and after irradiation

Ultra-fine-grained and gradient FeCrAl alloys with outstanding work hardening capability

Dynamic strain aging behavior of accident tolerance fuel cladding FeCrAl-based alloy for advanced nuclear energy

In-situ TEM investigation of defect evolution in FeCrAl during post-irradiation annealing

Study on high temperature creep behavior of the accident-resistant cladding Fe–13Cr–4Al-1.85Mo-0.85Nb alloy

Experiments and Modeling of the Macroscale Mechanical Responses of Neutron-Irradiated FeCrAl Alloys

The deformation behavior and mechanism modeling of a corrosion-resistant Ni-Cr-Mo alloy with nanoscale precipitates at room and elevated temperatures

Unraveling hot deformation behavior and microstructure evolution of nanolamellar TiAl/Ti3Al composites

Real-time Atomic Deformation Behavior of Nano CoCrCuFeNi High-Entropy Alloy

Deformation Localisation in Ion-Irradiated FeCr

High temperature deformation mechanism and microstructural evolution of relatively lightweight AlCoCrFeNi high entropy alloy

Role of loading direction on high-temperature tensile behavior of Fe-13Cr-4Al-2Mo-0.65Nb alloy

Defective structures in FeCrAl alloys from first principles calculations

Mechanism of dynamic recrystallization of a FeCrAl alloy during hot compression

Nanocrystalline FeCr alloys synthesised by severe plastic deformation -- a potential material for exchange bias and enhanced magnetostriction