Abstract:FeCrAl alloy is one of the candidate materials for reactor fuel cladding due to its excellent oxidation resistance at high temperature. However, the presence of Cr and Al has negative effects to the mechanical properties and poses a potential risk to the safy of reactor operation. In order to analyze the deformation mechanism of FeCrAl alloy system in microscale, the mechanical properties of FeCrAl single crystal under the influence of temperature and strain rate were studied by molecular dynamics method. The defects distribution, dislocation density change and deformation mechanism were discussed, and the effect of solute atoms on the result of simulation were analyzed. The results show that the increase of temperature increases the thermal motion of atoms, promotes the formation and growth of defects, reduces the interaction between atoms, and results in the decrease of elastic modulus and tensile strength. The increase of strain rate leads to the decrease of elastic modulus and tensile strength. The plastic deformation mechanism of low strain rate is mainly deformation twinning, of middle strain rate is dislocation slip, and of high strain rate is deformation with atomic arrangement disorder. The effect of temperature and strain rate on a-Fe and FeCrAl is similar, but Cr and Al in FeCrAl cause significant lattice distortion and stress concentration, promoting the formation and movement of defects and dislocations and reducing the yield strength and tensile strength. Based on the calculated results, a constitutive model for FeCrAl crystal system was established based on Field-Backofen equation, which extended the application of the simulation results.

Plastic Deformation Mechanism of γ Phase Fe-Cr Alloy Revealed by Molecular Dynamics Simulations

Shearing Mechanisms of Stacking Fault and Anti-Phase-boundary Forming Dislocation Pairs in the Γ′ Phase in Ni-based Single Crystal Superalloy

Study of the Plastic Deformation Mechanism of γ-Phase U-Mo Alloy by Molecular Dynamics Simulations

Molecular Dynamics Study on Tensile Mechanical Properties of FeCrAl Alloy

Plastic Deformation Transition in FeCrCoNiAlx High-Entropy Alloys

Plastic deformation mechanism of CoCrxNi medium entropy alloys

From stacking fault to phase transformation: A quantitative model of plastic deformation of CoCrFeMnNi under different strain rates

Structural Evolution and Transitions of Mechanisms in Creep Deformation of Nanocrystalline FeCrAl Alloys.

Molecular dynamics study on the strengthening mechanisms of Cr–Fe–Co–Ni high-entropy alloys based on the generalized stacking fault energy

N ov 2 01 5 First-Principles prediction of the deformation modes in austenitic Fe-CrNi alloys

Atomistic Simulation of Deformation Behaviors Polycrystalline CoCrFeMnNi High-Entropy Alloy under Uniaxial Loading

Deformation mechanism and microstructure evolution during superplastic deformation of friction stir processed CoCrFeNiMn high entropy alloy

First-Principles prediction of the deformation modes in austenitic Fe-Cr-Ni alloys

Deformation mechanism in nanolaminate FeCrAl alloys by in situ micromechanical strain rate jump tests at elevated temperatures

Atomic-scale Investigation of Creep Behavior and Deformation Mechanism in Nanocrystalline FeCrAl Alloys

Defective structures in FeCrAl alloys from first principles calculations

Molecular dynamics simulation of the γ’ phase deformation behaviour in nickel-based superalloys

Molecular dynamics simulation of tensile deformation behavior of single-crystal Fe–Cr–Al before and after irradiation

Simultaneously Enhancing the Strength and Ductility of Fe–Mn–C Twinning-Induced Plasticity Steel Via Cr/N Alloying

Crystal plasticity phase-field simulation of slip system anisotropy during creep of Co-Al-V monocrystal alloy under multidirectional strain

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression