Abstract:High-entropy alloys (HEA) and medium-entropy alloys (MEA), containing multiple principal elements typically with equiatomic or near-equiatomic ratios, have drawn considerable attention due to their unique and promising mechanical profiles, such as high tensile strength, superior ductility and exceptional fracture toughness. However, the elementary mechanisms controlling the deformation and fracture of this new class of alloys still need complementary analyses. In the present study, the nucleation and growth mechanisms of deformation bands in the medium-entropy CrCoNi alloy were investigated by atomic-resolution scanning transmission electron microscopy (STEM). It was revealed that planar dislocation slip is the dominant deformation mode in the early stages of deformation. With increasing strain, both deformation twins and hexagonal close packed (HCP) lamella simultaneously appear. Careful analysis of the dislocations involved in these processes confirms that two different mechanisms are responsible for the nucleation of deformation bands in the CrCoNi alloy: the three-layer mechanism proposed by Mahajan et al. and the transformation from HCP phase to twin. Activation of multiple slip systems at larger deformation levels leads to the activation of deviation-based mechanisms, which contribute to the twin growth. It was also observed that many HCP bands remain and overlap with nanoscale twins, leading to short range HCP-twin stackings, which contribute to the high work hardening rate of this alloy.

Twinning pathways in Fe and Fe–Cr alloys from first-principles theory

Unstable Twin In Body-Centered Cubic Tungsten Nanocrystals

N ov 2 01 5 First-Principles prediction of the deformation modes in austenitic Fe-CrNi alloys

Deformation Twinning Behaviors of the Low Stacking Fault Energy High-Entropy Alloy: an In-Situ TEM Study

Atomic-Scale In Situ Observations of Reversible Phase Transformation Assisted Twinning in a CrCoNi Medium-Entropy Alloy

Competition Between Slip and Twinning in Face-Centered Cubic Metals

Theoretical and Experimental Study of Phase Transformation and Twinning Behavior in Metastable High-Entropy Alloys

Temperature Dependent Stacking Fault Energy of FeCrCoNiMn High Entropy Alloy

Influence of Mn Content on the Intrinsic Energy Barriers of Paramagnetic FeMn Alloys from Longitudinal Spin Fluctuation Theory

Plastic Deformation Mechanism of γ Phase Fe-Cr Alloy Revealed by Molecular Dynamics Simulations

Effect of Twin Boundary Density on Mechanical Behavior of Al0.1CoCrFeNi High-Entropy Alloy by Molecular Dynamics Simulation

Twin boundary migration and reactions with stacking fault tetrahedron in Cu and CoCrCuFeNi high-entropy alloy

Simultaneously Enhancing the Strength and Ductility of Fe–Mn–C Twinning-Induced Plasticity Steel Via Cr/N Alloying

Generalized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy

First-Principles prediction of the deformation modes in austenitic Fe-Cr-Ni alloys

Exploring the Formation Mechanism of Deformation Twins in CrMnFeCoNi High Entropy Alloy

A novel simplified model for measuring the twinnability of face-centred-cubic metals

Molecular dynamics study on the strengthening mechanisms of Cr–Fe–Co–Ni high-entropy alloys based on the generalized stacking fault energy

Potential TRIP/TWIP coupled effects in equiatomic CrCoNi medium-entropy alloy

Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy

Effects of Alloying on Deformation Twinning in High Entropy Alloys