Abstract:Temperature is known to affect deformation mechanisms in metallic alloys. As temperature decreases, the stacking-fault energy in many face-centered cubic (fcc) alloys decreases, resulting in a change of deformation mode from dislocation slip to deformation twinning. Such an impact of temperature can be more complex in compositionally heterogeneous microstructures that exhibit, for example, local concentration fluctuation such as that in multi-principal element alloys. In this work, we compare the dislocation behavior and mechanical properties of a fcc Cr20Mn10Fe30Co30Ni10 high-entropy alloy at ambient and liquid-nitrogen temperatures. We find that a network of stacking faults is formed by uniformly extended dislocations at ambient temperatures with low stacking-fault energy, whereas at lower temperatures, uneven dissociation of dislocations becomes significant, which results in severe dislocation pile-ups together with their pronounced entanglement. Our findings indicate that as the stacking-fault energy decreases with decreasing temperature, the heterogeneity of the distribution of elements becomes more dominant in tuning the local variation of lattice resistance. As a result, the change in dislocation behavior at low temperatures strongly affects microstructural evolution and consequently leads to significantly more pronounced work hardening.

Deformation Twinning Behaviors of the Low Stacking Fault Energy High-Entropy Alloy: an In-Situ TEM Study

Unstable Twin In Body-Centered Cubic Tungsten Nanocrystals

Atomic-Scale In Situ Observations of Reversible Phase Transformation Assisted Twinning in a CrCoNi Medium-Entropy Alloy

Discrete Twinning Dynamics and Size-Dependent Dislocation-to Twin Transition in Body-Centred Cubic Tungsten

Exploring the Formation Mechanism of Deformation Twins in CrMnFeCoNi High Entropy Alloy

Strengthening High-Stacking-Fault-Energy Metals Via Parallelogram Nanotwins

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Simultaneous Twinning and Microband Formation Under Dynamic Compression in a High Entropy Alloy with a Complex Energetic Landscape

Multiple deformation mechanisms induced by pre-twinning in CoCrFeNi high entropy alloy

Twin boundary migration and reactions with stacking fault tetrahedron in Cu and CoCrCuFeNi high-entropy alloy

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

Effect of Twin Boundary Density on Mechanical Behavior of Al0.1CoCrFeNi High-Entropy Alloy by Molecular Dynamics Simulation

Twinning-induced dislocation and coordinated deformation behavior of a high-Nb TiAl alloy during high-cycle fatigue

Deformation Twins and Stacking Faults in an AA5182 Al-Mg Alloy Processed by High Pressure Torsion

High stress twinning in a compositionally complex steel of very high stacking fault energy

An in situ ambient and cryogenic transmission electron microscopy study of the effects of temperature on dislocation behavior in CrCoNi-based high-entropy alloys with low stacking-fault energy

Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy

Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

A molecular dynamics investigation into deformation mechanism of nanotwinned Cu/high entropy alloy FeCoCrNi nanolaminates

Deformation substructure development in AlXCoCrFeNi (X = 0, 0.3) high entropy alloy under different influencing factors