Abstract:The high entropy alloys (HEAs) of dual FCC have great potential for semi-solid processing. Therefore, at temperatures of 1130–1225 °C and strain rates of 0.1–10 s −1 isothermal deformation, semi-solid thixotropic behavior and microstructure evolution of the deformed CoCrCu 1.2 FeNi HEA were investigated by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), optical microscopy (OM), and electron backscattered diffraction (EBSD). The results show that the original billet is a deformed microstructure consisting of dual FCC structure. The alloy exhibits a typical stress-strain curve at the low strain rate. When the strain rate is larger than 0.5 s −1 , the stress-strain curves show two peaks. The apparent viscosity decreases with an increase of shear rate and deformation temperature, indicating that the shear thinning effect occurs. Semi-solid compression leads to uneven plastic deformation. According to the degree of plastic deformation, the sample is divided into hard deformation zone, large deformation zone, transition deformation zone and free deformation zone. The flow stresses, liquid phase fraction and deformation mechanisms of the solid particles can lead to variations in the microstructure of the different zones. The roundness of the grains increases and then decreases as the temperature rises, while the grain size fluctuates in the large deformation zone. Phase structure is not changed during semi-solid deformation, but it can weaken the segregation of Cu at low temperatures and low strain rates during isothermal deformation. The strain rate is the main factor affecting recrystallization, the degree of recrystallization increases with increasing temperature at low strain rates, and a large amount of deformation microstructure is produced at high strain rates.

Solidification Simulation and Experimental Validation of Single-Phase Fe–Co–Cr–Ni–V–Al High-Entropy Alloy

Solidification simulation of single-phase Fe–Co–Cr–Ni–V high entropy alloy

Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Prediction the effect of ta on the mechanical behaviour and experimental validation of novel six component Fe-co-Ni-Cr-V-ta eutectic high entropy alloys

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Microstructure and Mechanical Behavior Comparison between Cast and Additive Friction Stir-Deposited High-Entropy Alloy Al0.35CoCrFeNi

Microstructure and mechanical properties of Al0.4Co0.5V0.6FeNi high-entropy alloys processed by homogenization treatment

Phase Equilibria in the Al–Co–Cr–Fe–Ni High Entropy Alloy System: Thermodynamic Description and Experimental Study

Numerical Simulation and Experimental Casting of Nickel-Based Single-Crystal Superalloys by HRS and LMC Directional Solidification Processes

Integrated experimental and modeling approach for hot deformation behavior of Co-Cr-Fe-Ni-V High Entropy Alloy

Semi-solid thixotropic behavior and microstructure evolution of cold deformed CoCrCu 1.2 FeNi high-entropy alloy

Microstructure, mechanical properties and corrosion resistance of an as-cast fine-structured Cr-Fe-Ni-Al-Si high entropy alloy

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

Microstructure characterization and phase evolution of equiatomic AlCoMoFeNi high entropy alloy synthesized by mechanical alloying

Microstructural Study of CrNiCoFeMn High Entropy Alloy Obtained by Selective Laser Melting

Macrostructure, Microstructure, and Mechanical Properties of Al0.2CoCrFeNi High-Entropy Alloy Produced by Vacuum Induction Melting

Microstructural evolution, mechanical and corrosion behavior of an Al7.5Co20.5Fe24Ni24Cr24 high‐entropy alloy

Electron beam melting of (FeCoNi)86Al7Ti7 high-entropy alloy

Phase equilibria in equiatomic CoCuFeMnNi high entropy alloy

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion