Abstract:The microstructure and properties of cobalt-free cost-effective AlCrFe2Ni2 high entropy alloy (HEA) in the as-cast condition and after thermo-mechanical processing by severe cold-rolling and annealing were investigated in the present work. The as-cast HEA showed a heterogeneous microstructure consisting of relatively coarse lamellar and much finer intertwined regions. The coarse regions consisted of eutectic mixture of FCC and ordered B2 (along with minor BCC) phases. The FCC phase was enriched in Fe and Cr, while the B2 phase was found enriched in Ni and Al but depleted in Cr. The BCC/B2 phase in the as-cast material showed phase separation due to spinodal decomposition to two different B2 phases in the fine regions. The overall FCC phase and BCC/B2 phase fractions were ∼60% and 40%, respectively. Despite the complex microstructure, the presence of a high fraction of the ductile FCC phase rendered remarkable workability, allowing heavy cold-rolling up to 90% reduction in thickness. Heavy deformation resulted in the development of intriguing microstructural features such as folding and bending of the lamellae, local shearing, and finally, deformation-induced nanocrystallization of the FCC phase. However, the B2 phase retained the ordered structure even after 90% cold-rolling. Annealing at 800 °C resulted in the formation of an ultrafine microduplex structure with significant resistance to grain growth even up to an annealing temperature of 1200 °C. A high yield (∼880 MPa) and tensile strength (̴ 1100 MPa) coupled with appreciable elongation (∼10%) could be achieved after annealing at 800 °C. The tensile properties obtained were superior to the other cobalt-free HEAs, which indicate the promising application of the cobalt-free cost-effective AlCrFe2Ni2 HEA as an advanced structural material.

Macrostructure, Microstructure, and Mechanical Properties of Al0.2CoCrFeNi High-Entropy Alloy Produced by Vacuum Induction Melting

Macro-micro Analysis of Mechanical Properties of Al0.6CoCrFeNi High-Entropy Alloy Particle-Reinforced Al-based Composites

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing

Microstructural Evolution and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy after Cold Rolling and Annealing Treatments

Microstructure, mechanical properties and corrosion resistance of an as-cast fine-structured Cr-Fe-Ni-Al-Si high entropy alloy

Microstructure and mechanical properties of Co-free AlCrFeNiTi 0.2 eutectic high-entropy alloy

Microstructure, Mechanical Properties, and Damping Capacity of AlxCoCrFeNi High-Entropy Alloys Prepared by Spark Plasma Sintering

Microstructural Evolution and Tensile Properties of Al0.3CoCrFeNi High-Entropy Alloy Associated with B2 Precipitates

Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy

Microstructure and Mechanical Behavior Comparison between Cast and Additive Friction Stir-Deposited High-Entropy Alloy Al0.35CoCrFeNi

Microstructural evolution of CrCuFeNiZn nanocrystalline high entropy alloy prepared by mechanical alloying

Microstructure and tensile properties of Co-free Fe4CrNi(AlTi) high-entropy alloys

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Evaluation of the impact of Mn and Al on the microstructure of Fe–Co–Ni–Cr based high entropy alloys

Nanostructured Al–Ti–Fe–Mn–Ni High-Entropy Alloy by Mechanical Alloying: Synthesis and Characterization