Wide Band Stop Response Using Interdigital Capacitor/CSRR DGS in Elliptical Microstrip Low-Pass Filter
Dristi Singhal,Shreyanshi Singh,Vipul Kaushal,Amit Birwal,Kamlesh Patel
DOI: https://doi.org/10.1590/2179-10742020v19i4945
2020-12-01
Journal of Microwaves, Optoelectronics and Electromagnetic Applications
Abstract:<span><em>Singhal, Dristi</em>; <em>Singh, Shreyanshi</em>; <em>Kaushal, Vipul</em>; <em>Birwal, Amit</em>; <em>Patel, Kamlesh</em>; <br/><br/> In this paper, a compact elliptic-response microstrip low pass filter (LPF) is presented with a wide stop-band using stepped impedance resonators. With high attenuation in the stop-band, the overall size reduction of the proposed filter is achieved using a novel defected ground structure technique using an interdigital capacitor and complementary split ring resonator (CSRR). A 4.2 GHz LPF is designed and simulated on FR4 substrate and a stop band of 8.8 GHz is obtained by utilizing interdigital and complementary split ring resonator. Results further show that the use of U-shaped high impedance line on the top layer of filter enhances the stop-band bandwidth by 2.2 GHz. In the final design, the passband insertion loss is found below 0.5 dB, and –10 dB is obtained over a band from 5.06 GHz to 17.06 GHz between input and output ports. The normalized circuit size of the filter is 0.417× 0.202 and the figure of merit is calculated about 55 at the cut-off frequency. These proposed LPFs have promised significant advantages in the stop-band characteristics with an acceptable roll-off rate for spurious-free communications.</span>