Abstract:Purpose This paper aims to present the simulation, fabrication and testing of a novel ultra-wide band (UWB) band-pass filters (BPFs) with better transmission and rejection characteristics on a low-loss Taconic substrate and analyze using the coupled theory of resonators for UWB range covering L, S, C and X bands for radars, global positioning system (GPS) and satellite communication applications. Design/methodology/approach The filter is designed with a bent coupled transmission line on the top copper layer. Defected ground structures (DGSs) like complementary split ring resonators (CSRRs), V-shaped resonators, rectangular slots and quad circle slots (positioned inwards and outwards) are etched in the ground layer of the filter. The circular orientation of V-shaped resonators adds compactness when linearly placed. By arranging the quad circle slots outwards and inwards at the corner and core of the ground plane, respectively, two filters (Filters I and II) are designed, fabricated and measured. These two filters feature a quasi-elliptic response with transmission zeros (TZs) on either side of the bandpass response, making it highly selective and reflection poles (RPs), resulting in a low-loss filter response. The transmission line model and coupled line theory are implemented to analyze the proposed filters. Findings Two filters by placing the quad circle slots outwards (Filter I) and inwards (Filter II) were designed, fabricated and tested. The fabricated model (Filter I) provides transmission with a maximum insertion loss of 2.65 dB from 1.5 GHz to 9.2 GHz. Four TZs and five RPs are observed in the frequency response. The lower and upper stopband band width (BW) of the measured Filter I are 1.2 GHz and 5.5 GHz of upper stopband BW with rejection level greater than 10 dB, respectively. Filter II (inward quad circle slots) operates from 1.4 GHz to 9.05 GHz with 1.65 dB maximum insertion loss inside the passband with four TZs and four RPs, which, in turn, enhances the filter characteristics in terms of selectivity, flatness and stopband. Moreover, 1 GHz BW of lower and upper stopbands are observed. Thus, the fabricated filters (Filters I and II) are therefore evaluated, and the outcomes show good agreement with the electromagnetic simulation response. Research limitations/implications The limitation of this work is the back radiation caused by DGS, which can be eradicated by placing the filter in the cavity and retaining its performance. Practical implications The proposed UWB BPFs with novel resonators find their role in the UWB range covering L, S, C and X bands for radars, GPS and satellite communication applications. Originality/value To the best of the authors’ knowledge, for the first time, the authors develop a compact UWB BPFs (Filters I and II) with BW greater than 7.5 GHz by combining reformed coupled lines and DGS resonators (CSRRs, V-shaped resonators [modified hairpin resonators], rectangular slots and quad circle slots [inwards and outwards]) for radars, GPS and satellite communication applications.

Design of a unit composite right/left-handed cell based bandpass filter with floating slot approach and suppression of spurious using defected microstrip structures

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Novel Microstrip Bandpass Filter Based On Defected Ground Structure And Slotline Coupling Techniques

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Band Rejection Filter Based on A Composite Spoof Surface Plasmon Periodic Structure

Hybrid Microstrip T-Stub/Defected Ground Structure Cell for Electromagnetic Interference Bandpass Filter Design

High-confinement ultra-wideband bandpass filter using compact folded slotline spoof surface plasmon polaritons

A microstrip bandpass filter using coupled lines loaded by open stubs

Design of wide stopband lowpass filter using defected ground structure

Miniaturized broadband high out-of-band rejection bandpass filter based on spoof surface plasmon polaritons with defected ground structure

Modelling of defected structures and stub based compact ultra-wideband bandpass filter (UWB-BPF) with a single notched band

A Highly Independent Multiband Bandpass Filter Using a Multi-Coupled Line Stub-SIR With Folding Structure

Design of novel multiband bandpass filters based on coupled symmetric short‐circuit stub multimode resonators

Miniaturized Bandpass Filter with High Selectivity and Wide Stopband Using Dual-Layer Structure

Bandpass filter with wide stopband using broadsidecoupled microstrip T-stub/DGS cell

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

Compact slot-line bandpass filter using backside microstrip open-stubs and air-bridge structure for spurious suppression

Microstrip Low-Pass Filter With Wide Stopband Using Coupled-Line Hairpin Unit

Quasi-elliptic band pass filter using resonators based on coupling theory for ultra-wide band applications

Differential Signal Propagation in Spoof Plasmonic Structure and Its Application in Microwave Filtering Balun