Design of wide stopband lowpass filter using defected ground structure
S. K. Shoukat Vali,K. Srinivasa Rao
DOI: https://doi.org/10.1007/s00542-024-05651-w
2024-04-16
Microsystem Technologies
Abstract:In this paper, a wide stopband low-pass filter (LPF) is proposed using the one-cell triangle and cascaded triangle defected ground structure (DGS). In this proposed structure, no coupling load is applied. The performance characteristics of the proposed low-pass filter were studied in both electromagnetic and equivalent simulations for the one-cell and cascaded triangle DGS. The equivalent circuit of the proposed low-pass filter is extracted with the help of electromagnetic (EM) simulation. The proposed low-pass filter is analyzed with both EM and equivalent simulations using the HFSS and ADS FEM tools, respectively. The performance characteristics of the proposed one-cell triangle arrowhead, such as cut-off frequency, stopband attenuation at the resonance frequency, passband width, stop bandwidth, and insertion losses, are 14 GHz, − 29 dB, 11.4 GHz, 15.5 GHz, and < 0.2 dB, respectively. Additionally, the performance characteristics of the 3-cell triangle arrowhead, such as cut-off frequency, stopband attenuation at the resonance frequency, passband width, stop bandwidth, and insertion losses, are 17.4 GHz, − 28 dB, 13.5 GHz, 20.1 GHz, and < 0.12 dB, respectively. The proposed structure shows good agreement between both EM and equivalent simulations. With this, the proposed LPF structure is utilized in wide stopband applications for satellite and radar communications.
engineering, electrical & electronic,materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied