Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Hybrid Microstrip/DGS Cell for Filter Design

Hybrid Microstrip T-Stub/Defected Ground Structure Cell for Electromagnetic Interference Bandpass Filter Design

Compact Substrate Integrated Waveguide (SIW) Filter with Defected Ground Structure

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

Miniaturized Bandpass Filter with High Selectivity and Wide Stopband Using Dual-Layer Structure

Bandpass filter with wide stopband using broadsidecoupled microstrip T-stub/DGS cell

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

Compact Lpf with Pair of Coupling Slots for Wide Stopband Suppression

UWB Bandpass Filter with Wide Notch Using Hybrid Microstrip/cpw Scheme, Defected Microstrip Array, and Defected Corner Scheme

Novel Microstrip Bandpass Filter Based On Defected Ground Structure And Slotline Coupling Techniques

A Novel Low-Pass Filter of Wide Stop-Band with U-Shaped Defected Ground Structure

Wideband Bandpass Filter with High Selectivity Based on Dual‐mode DGS Resonator

High-selectivity wideband bandpass filter based on quintuple-mode stub-loaded resonator and defected ground structures

Compact Quad-Mode Bandpass Filter Based on Quad-Mode DGS Resonator

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

A Wide Stopband Wideband HTS Filter Using Stepped-Impedance Resonators With an Interdigital Capacitor Structure

Planar Microstrip UWB Bandpass Filter Using U-shaped Slot Coupling Structure