Abstract:We focus on the high frequency current method which is widely applied in the partial discharge (PD) detection of cables. Aiming at guaranteeing the accuracy of this method, we study an innovative time-domain technology for effectively measuring the transfer impedance of the high frequency current transformers (HFCTs). The proposed technology called pulse injection method obtains the system response under the excitation of the wide-band instantaneous pulse signal. Firstly, by studying the working principle of HFCTs, we summarize that the bandwidth of the selected signal acquisition device should be at least 100MHz to ensure measurement accuracy. Secondly, Gauss pulse and square wave pulse are generated to determine the effects of different sources. The measurement results indicate that Gauss pulse is more suitable for pulse injection method, and the rise time should be under 10 ns to improve the starting frequency of oscillation distortion. Finally, the transfer impedance curves of five types of HFCTs are acquired by both pulse injection and traditional point-frequency methods. The measurement results show a remarkable consistency between two methods. However, pulse injection method requires the simpler operation and has a higher resolution, obviously improving the measurement efficiency and better displaying the details of the transfer impedance curves.

Impedance Determination for High Voltage Air-Core Reactor Over Wide Frequency Range Based on Impulse Injection Technique

Frequency Analysis of Measured Transient Voltage of Neutral Grounding Reactor on UHV AC Transmission Line

A High-Voltage Pulse Generator for Corona Plasma Generation

Impulse Oscillator Circuit of Turn-to-turn Over-voltage Test for Air-core Reactors

Overvoltage Analysis and Electric Field Simulation of High Voltage Reactor in Synthetic Circuit

Research on high-voltage reactor compensation of UHV AC transmission lines

A Noise Interference Suppression Method with Optimized Frequency Adjustment for Impedance Measurement

Research on Vibration Measurement Method and Analysis of Air-core Reactor

Simplified Calculation and Coverage of Power Frequency Magnetic Field Around 10kv Air-core Reactors

Electrical Description of an Inductively Coupled Plasma Processing Reactor with Discharge Parameters Calculated from a Global Model

On-Site Experimental Analysis for Impact of Wideband Terminal Model to Transient Overvoltage Based on a Full-Scale 200kV MMC-HVDC Converter Station

Research On Pulse Oscillating Circuit Of Turn-To-Turn Over-Voltage Test For Reactors

Simulation on Transient Characteristics of Inter-Turn Short Circuit Fault of Dry-type Air-Core Reactor Based on ANSYS Maxwell

The reactive power compensation and harmonic filtering and the over-voltage analysis of the ITER power supply system

Method of Measuring Field Emission Current under High-Voltage Pulse

Research on Time-Domain Transfer Impedance Measurement Technology for High Frequency Current Transformers in Partial Discharge Detection of Cables

Experimental and Simulation Investigation of a Simplified In-Plasma Catalysis Reactor Powered by Repetitive Nanosecond Pulses

Eddy Current Heating Effect of High-Current DC Reactor Applied to ITER Poloidal Field Converter

&Amp;#x00b1;1100kv DC System Impedance Analysis under Various Operating Modes and Conditions

Study on Electric Field Distribution and Switching Impulse Discharge Characteristics of ±1100kv Dry-Type Smoothing Reactor

Simulation and Experiment on Discharge Characteristics of Indoor Devices in ±1100 Kv Converter Station Based on Potential Gradient Equivalent Method