Abstract:The insulation coordination for converter station is one of the key technologies to implement flexible DC power transmission projects, and the results of the research on this field can provide important guidance to the design, type selection, manufacture and test of converter equipments in converter stations. To decide insulation levels for equipments of converter stations in Zhoushan multi-terminal flexible DC power transmission project reasonably, the arrester layout schemes for converter stations are proposed; corresponding arrester parameters and protection levels are calculated; the recommended insulation margins for equipments in converter stations are given and based on the selected equipment insulation margins the insulation levels for equipments in converter stations are finally determined. Insulation coordination results corresponding to three different arrester layout schemes are given and the coordination results show that different arrester layout schemes mainly influence on the insulation levels among terminals of reactors connected to bridge arms:for the first arrester layout scheme, the insulation levels of lightning impulse and that of switching impulse among reactor terminals connected to bridge arms are 450 kV and 325 kV respectively, and for the second and the third arrester layout schemes the insulation levels among reactor terminals connected to bridge arms are the same and the insulation level of lightning impulse and that of switching impulse are 750 kV and 550 kV respectively. Except reactors connected to bridge arms, the recommended insulation levels for other equipments in converter stations under all arrester layout schemes are the same;for AC equipments at valve side of converter transformer the insulation levels of lightning impulse are recommended as 650 kV (or 750 kV) and the insulation level of switching impulse is recommended as 550 kV; the insulation level of lightning impulse and that of switching impulse for AC equipments at valve side of bridge arm reactors are taken the same as these for equipments at valve side of converter transformer; the insulation levels of lightning impulse of 200 kV DC buses in converter stations are recommended as 650 kV (or 750 kV) and that of switching impulse is recommended as 550 kV; the insulation levels of lightning impulse and these of switching impulse among terminals of DC smoothing reactors are taken as 850 kV (or 950 kV) and 750 kV respectively. Besides, the advantages and disadvantages of the three arrester layout schemes are analyzed. Results of this research topic can offer important foundation for Zhoushan multi-terminal flexible DC power transmission project and are available for reference to other VSC-HVDC projects.

Research on high-voltage reactor compensation of UHV AC transmission lines

Optimization Configuration of High Voltage Reactors in Large Power Grid

Research on Lower Limit of Compensation Degree for UHVA-C Transmission Lines

Frequency Analysis of Measured Transient Voltage of Neutral Grounding Reactor on UHV AC Transmission Line

Single-phase grounding overvoltage of long-distance UHVAC lines

Research on Voltage Stability of HVDC Receiving-end System Based on Power Limit Trajectory

Research on Power Frequency Over-Voltage in UHV AC Transmission Lines

A Recovery Method for HVDC Systems Following AC System Faults

Restriction on Secondary Arc Current on Ultra-high Voltage AC Double Circuit Transmission Lines on the Same Tower

Research on Long-distance Transmission Compensation Scheme for High-voltage Power Line along the Railway

Research on transient overvoltage for converter station of Zhoushan multi-terminal VSC-HVDC project

Analysis on Insulation Coordination Scheme for ±800 Kv DC Converter Station

Overvoltage Protection and Insulation Coordination for ?1 100 Kv UHVDC Converter Station

Study on Influences of Shunt Reactor to Internal Overvoltage in UHVAC System

Research on power frequency transient overvoltage in 1000kV UHV AC transmission line

Optimal Placement of Dynamic Reactive Power Compensation Devices for Improving Immunity to Commutation Failure in Multi-Infeed HVDC Systems

Research on Converter Valve Overvoltage Mechanism and Calculation Conditions of ± 800 Kv Converter Station

Overvoltage Protection and Insulation Coordination for ±1100 kV UHVDC Converter Station

DISCUSSION ON SEVERAL IMPORTANT PROBLEMS OF DEVELOPING UHV AC TRANSMISSON IN CHINA

Research on Insulation Coordination for Converter Stations of Zhoushan Multi-Terminal VSC-HVDC Transmission Project

On the DC Transient Overvoltage in the Converter Stations of ±800 Kv Xiluodu Zhexi HVDC Project