Abstract:There is a need for numerical models capable of predicting local accumulation of hydrogen near stress concentrators and crack tips to prevent and mitigate hydrogen assisted fracture in steels. The experimental characterisation of trapping parameters in metals, which is required for an accurate simulation of hydrogen transport, is usually performed through the electropermeation test. In order to study grain size influence and grain boundary trapping during permeation, two modelling approaches are explored; a 1D Finite Element model including trap density and binding energy as input parameters and a polycrystalline model based on the assignment of a lower diffusivity and solubility to the grain boundaries. Samples of pure iron after two different heat treatments - 950C for 40 minutes and 1100C for 5 minutes - are tested applying three consecutive rising permeation steps and three decaying steps. Experimental results show that the finer grain microstructure promotes a diffusion delay due to grain boundary trapping. The usual methodology for the determination of trap densities and binding energies is revisited in which the limiting diluted and saturated cases are considered. To this purpose, apparent diffusivities are fitted including also the influence of boundary conditions and comparing results provided by the constant concentration with the constant flux assumption. Grain boundaries are characterised for pure iron with a binding energy between 37.8 and 39.9 kJ/mol and a low trap density but it is numerically demonstrated that saturated or diluted assumptions are not always verified, and a univocal determination of trapping parameters requires a broader range of charging conditions for permeation. The relationship between surface parameters, i.e. charging current, recombination current and surface concentrations, is also studied.

Modelling of hydrogen diffusion in a steel containing micro-porosity. Application to the permeation experiment

Numerical Simulation on the Leakage and Diffusion of Hydrogen in Indoor Environment

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

Modelling of hydrogen diffusion leading to embrittlement in austenitic stainless steels

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

Numerical Modeling for Hydrogen Permeation Through Steel Under Sour-Corrosion and Tensile Stress

Numerical Evaluation on Analysis Methods of Trapping Site Density in Steels Based on Hydrogen Permeation Curve

Modelling of room temperature outgassing and diffusion in a martensitic advanced high-strength steel

Numerical Modeling of Microchannel Reactor with Porous Surface Microstructure Based on Fractal Geometry

Hydrogen Economy vs. Hydrogen Embrittlement: Indirect Electrochemical Determination of Hydrogen Diffusion in Steel

Modelling of Hydrogen Distribution at the Fatigue Crack Tip of Austenitic Stainless Steels in Internal and External Hydrogen Tests

Explicit implementation of hydrogen transport in metals

Phase-Field Modeling of Hydrogen Diffusion and Trapping in Steels

Different aspects of hydrogen diffusion behavior in pipeline steel

Multiphase-field Modelling of Hydrogen Pore Evolution During Alloy Solidification

Experimental and numerical analysis of hydrogen diffusion behaviors in an ultra-fine bainitic steel

A new perspective on hydrogen diffusion and hydrogen embrittlement in low-alloy high strength steel

Analysis of hydrogen diffusion in the three stage electro-permeation test

Mathematical modeling of mechanical properties in the permeation of green hydrogen through membrane separation materials

A continuum scale chemo-mechanical model for multi-trap hydrogen transport in deformed polycrystalline metals