Abstract:There is a need for numerical models capable of predicting local accumulation of hydrogen near stress concentrators and crack tips to prevent and mitigate hydrogen assisted fracture in steels. The experimental characterisation of trapping parameters in metals, which is required for an accurate simulation of hydrogen transport, is usually performed through the electropermeation test. In order to study grain size influence and grain boundary trapping during permeation, two modelling approaches are explored; a 1D Finite Element model including trap density and binding energy as input parameters and a polycrystalline model based on the assignment of a lower diffusivity and solubility to the grain boundaries. Samples of pure iron after two different heat treatments - 950C for 40 minutes and 1100C for 5 minutes - are tested applying three consecutive rising permeation steps and three decaying steps. Experimental results show that the finer grain microstructure promotes a diffusion delay due to grain boundary trapping. The usual methodology for the determination of trap densities and binding energies is revisited in which the limiting diluted and saturated cases are considered. To this purpose, apparent diffusivities are fitted including also the influence of boundary conditions and comparing results provided by the constant concentration with the constant flux assumption. Grain boundaries are characterised for pure iron with a binding energy between 37.8 and 39.9 kJ/mol and a low trap density but it is numerically demonstrated that saturated or diluted assumptions are not always verified, and a univocal determination of trapping parameters requires a broader range of charging conditions for permeation. The relationship between surface parameters, i.e. charging current, recombination current and surface concentrations, is also studied.

Numerical Evaluation on Analysis Methods of Trapping Site Density in Steels Based on Hydrogen Permeation Curve

Numerical Simulation of Hydrogen Permeation in Steels

Numerical Simulation on the Leakage and Diffusion of Hydrogen in Indoor Environment

Effect of hydrogen traps on hydrogen permeation in X80 pipeline steel —— a joint experimental and modelling study

Modelling of hydrogen diffusion in a steel containing micro-porosity. Application to the permeation experiment

Analysis of hydrogen diffusion in the three stage electro-permeation test

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

A new perspective on hydrogen diffusion and hydrogen embrittlement in low-alloy high strength steel

Phase-Field Modeling of Hydrogen Diffusion and Trapping in Steels

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

The Fatigue Threshold Computation Of Steel In Hydrogen Environment By Shakedown Analysis

Investigation of Hydrogen Diffusion and Trapping Behavior under Tensile Stresses in a Container Steel

Numerical simulation on influencing factors of thermal desorption spectrum of hydrogen in steel

A numerical study of hydrogen leakage and diffusion in a hydrogen refueling station

A Method to Calculate Hydrogen Trap Binding Energy in Austenitic Stainless Steel Using Local Equilibrium Model

Experimental and numerical analysis of hydrogen diffusion behaviors in an ultra-fine bainitic steel

Effect of Cementite on the Hydrogen Diffusion/Trap Characteristics of 2.25Cr-1Mo-0.25V Steel with and without Annealing

Quantitative investigation on deep hydrogen trapping in tempered martensitic steel

Analysis of hydrogen-induced delayed cracking and hydrogen trapping behavior in plastically deformed quenching and partitioning steel

Numerical Approach for Predicting Hydrogen Diffusion in Dual-Phase Hot Stamped Boron Steel with Hydrogen Embrittlement

Engineering metal-carbide hydrogen traps in steels