Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-performance layered potassium vanadium oxide for K-ion batteries enabled by reduced long-range structural order

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Potassium Ammonium Vanadate with Rich Oxygen Vacancies for Fast and Highly Stable Zn-Ion Storage.

Balancing the Redox Activity Against Structure Stability in High-Voltage Manganese/iron-Based Layered Oxide Cathodes Through Copper Doping for Potassium-Ion Batteries

Layer-structured K 0.5 Mn 0.8 Cu 0.1 Mg 0.1 O 2 for High-performance Potassium-ion Batteries by Alleviating the Phase Transformation

Potassium‐Ion Batteries: Surface Amorphization of Vanadium Dioxide (B) for K‐Ion Battery (Adv. Energy Mater. 23/2020)

Intralayer ordered structure engineering for long-life Mn-based potassium-ion battery cathodes

Layered K0.54Mn0.78Mg0.22O2 as a high-performance cathode material for potassium-ion batteries

Layer-structured P3-K 0.5 Mn 0.95 W 0.05 O 2 for Enhanced Potassium-ion Batteries by Mitigating Phase Transformation

Reconstructing Vanadium Oxide with Anisotropic Pathways for a Durable and Fast Aqueous K-Ion Battery

Layer-structured P3-K0.5Mn0.95W0.05O2 for Enhanced Potassium-ion Batteries by Mitigating Phase Transformation

A Vanadium-Based Metal-Organic Phosphate Framework Material K2[(VO)2(HPO4)2(C2O4)] As a Cathode for Potassium-Ion Batteries.

Fine Valence Regulation of Hydrated Vanadium Oxide As a Novel Cathode for Stable Potassium-Ion Storage.

Fine Valance Regulation of Hydrated Vanadium Oxide as A Novel Cathode for Stable Potassium-ion Storage

Suppressing the interlayer-gliding of layered P3-type K 0.5 Mn 0.7 Co 0.2 Fe 0.1 O 2 cathode materials on electrochemical potassium-ion storage

Enhanced K-ion kinetics in a layered cathode for potassium ion batteries.

Construction interlayer structure of hydrated vanadium oxides with tunable P-band center of oxygen towards enhanced aqueous Zn-ion batteries

Competing with Other Polyanionic Cathode Materials for Potassium-Ion Batteries Via Fine Structure Design: New Layered KVOPO4 with a Tailored Particle Morphology

Layer-structured K0.5Mn0.8Cu0.1Mg0.1O2 for High-Performance Potassium-Ion Batteries by Alleviating the Phase Transformation

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Facile Synthesis of Oxygen-Vacancy-Rich Li–K Coinsertion Vanadate Nanoflakes for High-Performance Zn-Ion Batteries