Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Potassium Ammonium Vanadate with Rich Oxygen Vacancies for Fast and Highly Stable Zn-Ion Storage.

From 0D to 3D: Controllable synthesis of ammonium vanadate materials for Zn 2+ storage with superior rate performance and cycling stability

Dual-defect modulating potassium anchored NH4V4O10 for stable high-energy aqueous zinc-ion batteries

Synergetic Effect of Alkali‐Site Substitution and Oxygen Vacancy Boosting Vanadate Cathode for Super‐Stable Potassium and Zinc Storage

Synchronous organic-inorganic co-intercalated ammonium vanadate cathode for advanced aqueous zinc-ion batteries

Facile Synthesis of Oxygen-Vacancy-Rich Li–K Coinsertion Vanadate Nanoflakes for High-Performance Zn-Ion Batteries

Regulating oxygen vacancies in ammonium vanadate electrode materials for advanced aqueous zinc ion batteries

Dual-engineering of ammonium vanadate for enhanced aqueous and quasi-solid-state zinc ion batteries

Enhanced Reversible Zinc Ion Intercalation in Deficient Ammonium Vanadate for High-Performance Aqueous Zinc-Ion Battery

Mg2+ Ions Pre‐Insertion Boosting Reaction Kinetics and Structural Stability of Ammonium Vanadates for High‐Performance Aqueous Zinc‐Ion Batteries

Unlocking the Zn storage performance of ammonium vanadate nanoflowers as high-capacity cathodes for aqueous zinc-ion batteries via potassium ion and ethylene glycol co-intercalation engineering

Ion‐Molecule Co‐Confining Ammonium Vanadate Cathode for High‐Performance Aqueous Zinc‐Ion Batteries

Optimizing Interplanar Spacing, Oxygen Vacancies and Micromorphology via Lithium‐Ion Pre‐Insertion into Ammonium Vanadate Nanosheets for Advanced Cathodes in Aqueous Zinc‐Ion Batteries

Ammonium Intercalation Engineering Regulated Structural Stability of V6O13 Cathodes for Durable Zinc Ion Batteries

Tuning [VO6] Octahedron of Ammonium Vanadates via F Incorporation for High‐Performance Aqueous Zinc Ion Batteries

Hydrothermal synthesis of ammonium vanadate [(NH4)2V7O16•3.6H2O] as a promising zinc-ion cathode: Experimental and theoretical study of its storage

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Interlayer-modified pseudocapacitive ammonium vanadium with high reversibility and stability enabling high-performance aqueous zinc-ion battery

A new sodium ion preintercalated and oxygen vacancy-enriched vanadyl phosphate cathode for aqueous zinc-ion batteries

Potassium Vanadates with Stable Structure and Fast Ion Diffusion Channel As Cathode for Rechargeable Aqueous Zinc-Ion Batteries

A High-Capacity Ammonium Vanadate Cathode for Zinc-Ion Battery