Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Potassium Vanadates with Stable Structure and Fast Ion Diffusion Channel As Cathode for Rechargeable Aqueous Zinc-Ion Batteries

Vanadate‐Based Fibrous Electrode Materials for High Performance Aqueous Zinc Ion Batteries

Toward a High-Performance Aqueous Zinc Ion Battery: Potassium Vanadate Nanobelts and Carbon Enhanced Zinc Foil

Potassium Ammonium Vanadate with Rich Oxygen Vacancies for Fast and Highly Stable Zn-Ion Storage.

Pre-potassiated hydrated vanadium oxide as cathode for quasi-solid-state zinc-ion battery

Bi-intercalated Vanadium Pentoxide Synthesized Via Hydrogen Peroxide-Induced Phase Transition for Highly Stable Cathode in Aqueous Zinc Ion Batteries

3D Oxygen‐Defective Potassium Vanadate/Carbon Nanoribbon Networks As High‐Performance Cathodes for Aqueous Zinc‐Ion Batteries

High-performance zinc-ion batteries enabled by electrochemically induced transformation of vanadium oxide cathodes

Optimized cyclic and electrochemical performance by organic ion N(CH3)4+ pre-inserted into N(CH3)4V8O20 cathode and hierarchy distributive Zn anode in aqueous zinc ion batteries

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Reconstructing Vanadium Oxide with Anisotropic Pathways for a Durable and Fast Aqueous K-Ion Battery

Electrolyte Concentration Regulation Boosting Zinc Storage Stability of High-Capacity K0.486V2O5 Cathode for Bendable Quasi-Solid-State Zinc Ion Batteries

Anion and Cation Co-Modified Vanadium Oxide for Cathode Material of Aqueous Zinc-Ion Battery

High performance aqueous zinc battery enabled by potassium ion stabilization

Vanadium Oxide with Elevated Interlayers for Durable Aqueous Hybrid Li + /Zn 2+ Batteries

Hydrated NH4V3O8 Nanobelts Electrode for Superior Aqueous and Quasi-Solid-State Zinc Ion Batteries

High-Performance Aqueous Zinc-Ion Batteries Enabled by Superlattice Intercalation Zn3V2O7-C Cathodes

Green Synthesis of Vanadate Nanobelts at Room Temperature for Superior Aqueous Rechargeable Zinc-Ion Batteries

Vanadium-based cathodes for aqueous zinc ion batteries: Structure, mechanism and prospects

Preparation and Performance of Highly Stable Cathode Material Ag2V4O11 for Aqueous Zinc-Ion Battery

Highly Stable Aqueous Zn‐Ion Batteries Achieved by Suppressing the Active Component Loss in Vanadium‐Based Cathode