Abstract:Mn‐based layered oxides are one of the most appealing cathodes for potassium‐ion batteries (PIBs) because of their high theoretical capacity. However, the Jahn–Teller effect of Mn3+ induces detrimental structural disorder and irreversible phase transition, leading to inferior cycling stability. Herein, an efficient strategy to suppress the Jahn–Teller effect in Mn‐based layered oxides by regulating the Mn average valence is demonstrated. To verify this strategy, Ti4+ and Mg2+ ions are chosen and introduced into the layered oxides (K0.5Mn0.7Co0.2Fe0.1O2), which can enhance the structural stability but have opposite effects on the regulation of Mn3+/4+ valence. The K0.5Mn0.6Co0.2Fe0.1Mg0.1O2 with a higher Mn valence (4+) exhibits long‐term cycling stability as a PIB cathode compared to the K0.5Mn0.6Co0.2Fe0.1Ti0.1O2 with a lower Mn valence (3.667+). Meanwhile, the detrimental phase transition from P3 to O3 caused by Jahn–Teller effect is completely suppressed, and is replaced by a highly reversible single‐phase solid solution reaction for K0.5Mn0.6Co0.2Fe0.1Mg0.1O2. The enhanced cycling stability and single‐phase reaction are attributed to the suppressed Jahn–Teller effect via Mn valence regulation, confirmed by first‐principles calculations. Therefore, this discovery paves the way for the development of advanced layered cathodes for the next‐generation high‐performance PIBs. By accurately regulating the Mn average valence, the Jahn–Teller effect can be effectively suppressed. The K0.5Mn0.6Co0.2Fe0.1Mg0.1O2 with a higher Mn valence (4+) exhibits long‐term cycling stability compared to that of the K0.5Mn0.6Co0.2Fe0.1Ti0.1O2 with a lower Mn valence (3.667+). The enhanced cycling stability is attributed to the suppressed Jahn–Teller effect via a Mn valence regulation.

Layer-structured K0.5Mn0.8Cu0.1Mg0.1O2 for High-Performance Potassium-Ion Batteries by Alleviating the Phase Transformation

Layer-structured K 0.5 Mn 0.8 Cu 0.1 Mg 0.1 O 2 for High-performance Potassium-ion Batteries by Alleviating the Phase Transformation

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Layer-structured P3-K 0.5 Mn 0.95 W 0.05 O 2 for Enhanced Potassium-ion Batteries by Mitigating Phase Transformation

Balancing the Redox Activity Against Structure Stability in High-Voltage Manganese/iron-Based Layered Oxide Cathodes Through Copper Doping for Potassium-Ion Batteries

Suppressing Jahn-Teller distortion and phase transition of K0.5MnO2 by K-site Mg substitution for potassium-ion batteries

Suppressing Jahn-Teller distortion and phase transition of K<sub>0.5</sub>MnO<sub>2</sub> by K-site Mg substitution for potassium-ion batteries

Layer-structured P3-K0.5Mn0.95W0.05O2 for Enhanced Potassium-ion Batteries by Mitigating Phase Transformation

Co/Al Co-Substituted Layered Manganese-Based Oxide Cathode for Stable and High-Rate Potassium-Ion Batteries

Interface Engineering Enabled High-Performance Layered P3-Type K 0.5 MnO 2 Cathode for Low-Cost Potassium-Ion Batteries

Intralayer ordered structure engineering for long-life Mn-based potassium-ion battery cathodes

Layered K0.54Mn0.78Mg0.22O2 as a high-performance cathode material for potassium-ion batteries

Designing Advanced P3-type K0.45Ni0.1Co0.1Mn0.8O2 and Improving Electrochemical Performance Via Al/Mg Doping As a New Cathode Material for Potassium-Ion Batteries

A synergistic pinning effect in a layer-structured oxide cathode for enhancing stability towards potassium-ion batteries

Layer-Structured Multitransition-Metal Oxide Cathode Materials for Potassium-Ion Batteries with Long Cycling Lifespan and Superior Rate Capability

Suppressing the Jahn–Teller Effect in Mn‐Based Layered Oxide Cathode toward Long‐Life Potassium‐Ion Batteries

Promoting Reversibility of Layered Potassium Cathode Through Interstitial Doping

Suppressing the interlayer-gliding of layered P3-type K 0.5 Mn 0.7 Co 0.2 Fe 0.1 O 2 cathode materials on electrochemical potassium-ion storage

Layered oxides with solid-solution reaction for high voltage potassium-ion batteries cathode

Zn Doping Strategy to Suppress the Jahn–Teller Effect to Stabilize Mn‐Based Layered Oxide Cathode toward High‐Performance Potassium Ion Batteries

Progressive "layer to Hybrid Spinel/Layer" Phase Evolution with Proton and Zn2+ Co-intercalation to Enable High Performance of MnO2-Based Aqueous Batteries.