Abstract:Mn‐based layered oxides are one of the most appealing cathodes for potassium‐ion batteries (PIBs) because of their high theoretical capacity. However, the Jahn–Teller effect of Mn3+ induces detrimental structural disorder and irreversible phase transition, leading to inferior cycling stability. Herein, an efficient strategy to suppress the Jahn–Teller effect in Mn‐based layered oxides by regulating the Mn average valence is demonstrated. To verify this strategy, Ti4+ and Mg2+ ions are chosen and introduced into the layered oxides (K0.5Mn0.7Co0.2Fe0.1O2), which can enhance the structural stability but have opposite effects on the regulation of Mn3+/4+ valence. The K0.5Mn0.6Co0.2Fe0.1Mg0.1O2 with a higher Mn valence (4+) exhibits long‐term cycling stability as a PIB cathode compared to the K0.5Mn0.6Co0.2Fe0.1Ti0.1O2 with a lower Mn valence (3.667+). Meanwhile, the detrimental phase transition from P3 to O3 caused by Jahn–Teller effect is completely suppressed, and is replaced by a highly reversible single‐phase solid solution reaction for K0.5Mn0.6Co0.2Fe0.1Mg0.1O2. The enhanced cycling stability and single‐phase reaction are attributed to the suppressed Jahn–Teller effect via Mn valence regulation, confirmed by first‐principles calculations. Therefore, this discovery paves the way for the development of advanced layered cathodes for the next‐generation high‐performance PIBs. By accurately regulating the Mn average valence, the Jahn–Teller effect can be effectively suppressed. The K0.5Mn0.6Co0.2Fe0.1Mg0.1O2 with a higher Mn valence (4+) exhibits long‐term cycling stability compared to that of the K0.5Mn0.6Co0.2Fe0.1Ti0.1O2 with a lower Mn valence (3.667+). The enhanced cycling stability is attributed to the suppressed Jahn–Teller effect via a Mn valence regulation.

Layer-Structured Multitransition-Metal Oxide Cathode Materials for Potassium-Ion Batteries with Long Cycling Lifespan and Superior Rate Capability

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Balancing the Redox Activity Against Structure Stability in High-Voltage Manganese/iron-Based Layered Oxide Cathodes Through Copper Doping for Potassium-Ion Batteries

Layer-structured K 0.5 Mn 0.8 Cu 0.1 Mg 0.1 O 2 for High-performance Potassium-ion Batteries by Alleviating the Phase Transformation

Single-crystalline Mn-based Oxide As a High-Rate and Long-Life Cathode Material for Potassium-Ion Battery

A synergistic pinning effect in a layer-structured oxide cathode for enhancing stability towards potassium-ion batteries

Mn-based Layered Oxide Microspheres Assembled by Ultrathin Nanosheets As Cathode Material for Potassium-Ion Batteries

Layer-structured P3-K0.5Mn0.95W0.05O2 for Enhanced Potassium-ion Batteries by Mitigating Phase Transformation

Layered K0.54Mn0.78Mg0.22O2 as a high-performance cathode material for potassium-ion batteries

Layer-structured P3-K 0.5 Mn 0.95 W 0.05 O 2 for Enhanced Potassium-ion Batteries by Mitigating Phase Transformation

Research Status and Development Trend of Layered K&lt;italic&gt;&lt;sub&gt;x&lt;/sub&gt;&lt;/italic&gt;MnO&lt;sub&gt;2&lt;/sub&gt;-based Cathode Materials for Potassium-Ion Batteries

Intralayer ordered structure engineering for long-life Mn-based potassium-ion battery cathodes

Interface Engineering Enabled High-Performance Layered P3-Type K 0.5 MnO 2 Cathode for Low-Cost Potassium-Ion Batteries

Structural Insight into Layer Gliding and Lattice Distortion in Layered Manganese Oxide Electrodes for Potassium‐Ion Batteries

Promoting Reversibility of Layered Potassium Cathode Through Interstitial Doping

Co/Al Co-Substituted Layered Manganese-Based Oxide Cathode for Stable and High-Rate Potassium-Ion Batteries

Review on Layered Manganese‐Based Metal Oxides Cathode Materials for Potassium‐Ion Batteries: from Preparation to Modification

Suppressing the interlayer-gliding of layered P3-type K 0.5 Mn 0.7 Co 0.2 Fe 0.1 O 2 cathode materials on electrochemical potassium-ion storage

Layered Oxide Cathode for Potassium‐Ion Battery: Recent Progress and Prospective

Investigation of Potassium Storage in Layered P3-Type K 0.5 MnO 2 Cathode.

Suppressing the Jahn–Teller Effect in Mn‐Based Layered Oxide Cathode toward Long‐Life Potassium‐Ion Batteries