Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fine Valence Regulation of Hydrated Vanadium Oxide As a Novel Cathode for Stable Potassium-Ion Storage.

Fine Valance Regulation of Hydrated Vanadium Oxide as A Novel Cathode for Stable Potassium-ion Storage

Potassium Ammonium Vanadate with Rich Oxygen Vacancies for Fast and Highly Stable Zn-Ion Storage.

Uncovering the Fundamental Role of Interlayer Water in Charge Storage for Bilayered V2O5 · Nh2o Xerogel Cathode Materials

Confined Assembly of Hydrated Vanadium Oxide into Hollow Mesoporous Carbon Nanospheres for Fast and Stable K+ Storage Capability

Heterovalent dual-ion interlayer-confined vanadium oxide nanobelts as a stable cathode for zinc storage

Towards a Stable Layered Vanadium Oxide Cathode for High-Capacity Calcium Batteries

Construction interlayer structure of hydrated vanadium oxides with tunable P-band center of oxygen towards enhanced aqueous Zn-ion batteries

Layered potassium vanadate K2V6O16 nanowires: A stable and high capacity cathode material for calcium-ion batteries

Bi-intercalated vanadium pentoxide synthesized by hydrogen peroxide-induced phase transition for highly stable cathode of aqueous zinc ion batteries

Hydrogen Sodium Vanadium Oxide Hydrate with Oxygen Vacancy: A New Layered Cathode Material for Sodium-Ion Battery

High-performance layered potassium vanadium oxide for K-ion batteries enabled by reduced long-range structural order

Potassium‐Ion Batteries: Surface Amorphization of Vanadium Dioxide (B) for K‐Ion Battery (Adv. Energy Mater. 23/2020)

Engineering ultra-enlarged interlayer carbon-containing vanadium disulfide composite for high-performance sodium and potassium ion storage

Dual Effects of Metal and Organic Ions Co‐Intercalation Boosting the Kinetics and Stability of Hydrated Vanadate Cathodes for Aqueous Zinc‐Ion Batteries

Bi-intercalated Vanadium Pentoxide Synthesized Via Hydrogen Peroxide-Induced Phase Transition for Highly Stable Cathode in Aqueous Zinc Ion Batteries

Layered Structure Modification of Sodium Vanadate through Ca/F Co‐Doping for Enhanced Energy Storage Performance

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Interlayer Modification of Pseudocapacitive Vanadium Oxide and Zn(H 2 O) n 2+ Migration Regulation for Ultrahigh Rate and Durable Aqueous Zinc‐Ion Batteries

Hydration Enables Air‐Stable and High‐Performance Layered Cathode Materials for both Organic and Aqueous Potassium‐Ion Batteries

Surface Amorphization of Vanadium Dioxide (B) for K‐Ion Battery