Abstract:Polymer dielectric materials with hydroxyl functionalities such as poly(4-vinylphenol) and poly(vinyl alcohol) have been utilized widely in organic thin-film transistors (OTFTs) because of their excellent insulating performance gained by hydroxyl-mediated cross-linking. However, the polar hydroxyl functionality also deleteriously affects the performance of OTFTs and significantly impairs the device stability. In this study, a sub-20 nm, high-k copolymer dielectric with hydroxyl functionality, poly(2-hydroxyethyl acrylate-co-di(ethylene glycol) divinyl ether), was synthesized in the vapor phase via initiated chemical vapor deposition. The inherently dry environment offered by the vapor-phase polymer synthesis prompted the snuggling of polar hydroxyl functionalities into the bulk polymer film to form a molecular thin hydrophobic skin layer at its surface, verified by near-edge X-ray absorption fine structure analysis. The chemical composition of the copolymer dielectric was optimized systematically to achieve high dielectric constant (k ≈ 6.2) as well as extremely low leakage current densities (less than 3 × 10-8 A/cm2 in the range of ±2 MV/cm) even with sub-20 nm thickness, leading to one of the highest capacitance (higher than 300 nF/cm2) achieved by a single polymer dielectric to date. Exploiting the structural advantage of the cross-linked high-k polymer dielectric, high-performance OTFTs were obtained. Notably, the spontaneously formed molecular thin, hydrophobic skin layer in the copolymer film substantially suppressed the hysteresis in the transistor operation. The trap analysis also suggested the formation of bulk trap with a high energy barrier and sufficiently low trap densities at the semiconductor/dielectric interface, owing to the surface skin layer. Furthermore, the OTFTs with the -OH-containing copolymer dielectric showed an unprecedentedly excellent operational stability. No apparent OTFT degradation was observed up to 50 000 s of high constant voltage stress (corresponding to the applied electric field of 1.4 MV/cm) because of the markedly suppressed interfacial trap density by the hydrophobic skin layer, together with the current compensation by the bulk hydroxyl functionalities. We believe that the surface modification-free, one-step polymer dielectric synthetic strategy will provide a new insight into the design of polymer dielectric materials for high-performance, low-power soft electronic devices with high operational stability.

High k PVP titanium dioxide composite dielectric with low leakage current for thin film transistor

Solution-processed transparent PVP:HfO 2 hybrid dielectric films with low leakage current density and high k

A PVP-silica-titania hybrid film for low-voltage organic field-effect transistor

P‐10.1: Low‐voltage Flexible Thin‐film Transistor Based on C3N4/polyvinylpyrrolidone Composite Electrolyte

Polysiloxane-Poly(Vinyl Alcohol) Composite Dielectrics For High-Efficiency Low Voltage Organic Thin Film Transistors

Graphitic Carbon Nitride/Polyvinylpyrrolidone Composite Dielectric for Low-Voltage Flexible InZnO Thin Film Transistor Grown on a Polyethylene Terephthalate Substrate

Enhanced Dielectric Constant and Hydrophobicity of P(VDF–TrFE)-based Composites

Environmentally friendly, flexible and high performance PVA dielectric layer fabricated by solution method and its application in IGZO-TFT

Improved Performance of Organic Thin Film Transistor with an Inorganic Oxide/Polymer Double-Layer Insulator

Solution-processed Stacked TiO2 and Al2O3 Dielectric Layers for High Mobility Thin Film Transistor

Solution-processed rare-earth thulium oxide with high permittivity for low-voltage transistor and inverters applications

Application of Solution-Processed High-Entropy Metal Oxide Dielectric Layers with High Dielectric Constant and Wide Bandgap in Thin-Film Transistors

Solution Processed Metal Oxide High-κ Dielectrics for Emerging Transistors and Circuits

Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors

Effect of Content Ratio on Solution-Processed High-K Titanium-Aluminum Oxide Dielectric Films

Oxygen incorporated solution-processed high-kappa La2O3 dielectrics with large-area uniformity, low leakage and high breakdown field comparable with ALD deposited films

PVC/Ti2C MXene/Diamond-Blend Films with High Dielectric Constants and Breakdown Strength Due to Electrical Synergy Between the Filler Materials

Strategic Customization of Polymeric Nanocomposites Modified by 2D Titanium Oxide Nanosheet for High-k and Flexible Gate Dielectrics

A Low-Temperature, Solution-Processed High-K Dielectric for Low-Voltage, High-Performance Organic Field-Effect Transistors (Ofets)

Modified poly(phenylene oxide)/(CaSr)TiO 3 composites with ultrahigh permittivity and low loss for microwave substrates

Spontaneous Generation of a Molecular Thin Hydrophobic Skin Layer on a Sub-20 nm, High- k Polymer Dielectric for Extremely Stable Organic Thin-Film Transistor Operation