Abstract:The glassy polymer of polystyrene (PS) enjoys a good reputation as a promising optical material; however, the inherent brittleness hinders its further applications. Conventional toughening methods are realized based on the premise of a sacrifice in transparency and stiffness. In this work, we found an unprecedented strategy to address these obstacles by combining extensional stress-induced ductility and suppressing physical aging. PS-based film with a high stiffness, long-term ductility, and excellent transparency is achieved by introducing a styrene–butadiene block copolymer into the PS matrix and subsequently annealing stretched. A nanofibrillar structure of the polybutadiene (PB) phase is formulated surrounded by a PS matrix, and thus, the elongation at break enhances from 3.1% up to 86.8%, accompanying the yield strength enhanced from 25.5 to 62.2 MPa. More significantly, compared with neat PS, these films survive from physical aging and persistent ductility over time. The morphology deformation induced by stress makes an obvious contribution to the improvement of transparency. Investigating the dynamics of chain segments indicates that the incorporation of the copolymer can restrict rearrangement and local relaxation to the PS chain. This work could pave a potential route toward high-performance PS and might be transferable to other glassy polymers with a fragile character.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsmacrolett.0c00733?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsmacrolett.0c00733</a>.Materials, sample preparation, and protocol; the calculation procedure of the average length of PB nanofibrils (Lf) by SAXS profiles; 2D-SAXS pattern and Lf of the films; the TEM images of 30 wt %, 50 wt % blend, and neat KR01; the mechanical properties of the neat KR01 unstretched films; comparison of mechanical and optical properties between toughening methods from the recent reports and our work; the typical stress–strain curves of the neat PS and 15 wt % blend films after 1 and 106 days of storage at room temperature, respectively; the mechanical properties of neat PS films and 15 wt % blend films after 407 days of storage; detailed information on optical properties in neat KR01 films; the orientation factor (f) of samples with diverse KR01 content and draw ratios; the TMDSC profiles of samples with diverse draw ratios; the calculation procedure of mass fraction of mobile amorphous fraction (MAF) and the rigid amorphous fraction (RAF); the DMA curves of specimens with various draw ratios (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.0c00733/suppl_file/mz0c00733_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Oxygen plasma induced solvent resistance of polystyrene particles enables the fabrication of ultra-thin free-standing crosslinked polymer films

Atmospheric pressure plasma functionalization of polystyrene

Polystyrene as a model system to probe the impact of ambient gas chemistry on polymer surface modifications using remote atmospheric pressure plasma under well-controlled conditions

Surface Roughening of Polystyrene and Poly(methyl methacrylate) in Ar/O2 Plasma Etching

Influence of Oxygen Plasma Treatment on Poly(Ether Sulphone) Films

A “Green” Stirring Plasma Functionalization Strategy for Controllable Oxygen-Containing Functional Groups on Octa-Methyl POSS Microstructure

Atmospheric plasma treatment of porous polymer constructs for tissue engineering applications

The Synthesis and Assembly Mechanism of Micro/Nano-Sized Polystyrene Spheres and Their Application in Subwavelength Structures

Effect of VUV Radiation on Surface Modification of Polystyrene Exposed to Atmospheric Pressure Plasma Jet

Morphologies of Surface Perforations and Parallel Cylinders Coexisting in Terraced Films of Block Copolymer/Homopolymer Blends with Oxygen Plasma Etching

Surface Cross-linking Phenomena of Organic Films Treated by Argon Plasma

Investigating the effect of gliding discharge plasma on polystyrene and Polyamide6 by positron annihilation lifetime spectroscopy

Tailoring Polypyrrole Film Characteristics with Multi-step Oxygen Plasma Treatment for High-Performance Strain Sensors: Impact on Bonding, Microstructure, and Electrical responsivity

Highly selective dry etching of polystyrene-poly(methyl methacrylate) block copolymer by gas pulsing carbon monoxide-based plasmas

SF6 Optimized O2 Plasma Etching of Parylene C

Efficient degradation of polystyrene microplastic pollutants in soil by dielectric barrier discharge plasma

Durably Ductile, Transparent Polystyrene Based on Extensional Stress-Induced Rejuvenation Stabilized by Styrene–Butadiene Block Copolymer Nanofibrils

Ultrathin Films Prepared from A Polystyrene-Based Polymeric Diazonium Salt Via Layer-By-Layer Self-Assembly

Transparent and Flexible Thin Films of ZnO-polystyrene Nanocomposite for UV-shielding Applications

Remote Plasma Enhanced Cyclic Etching of a Cyclosiloxane Polymer Thin Film

Plasma-induced conversion of polystyrene nanoplastics in water: Intermediates release, toxicity, and disinfection byproducts formation