A “Green” Stirring Plasma Functionalization Strategy for Controllable Oxygen-Containing Functional Groups on Octa-Methyl POSS Microstructure

Xiao Chen,Kevin Magniez,Pengchao Zhang,Wojciech Kujawski,Zhiqiang Chen,Ludovic F. Dumée
DOI: https://doi.org/10.3390/nano13202770
IF: 5.3
2023-10-16
Nanomaterials
Abstract:The distinctive cage-like structure of polyhedral oligomeric silsesquioxane (POSS) materials makes them highly effective fillers in composite membranes for separation applications. However, realizing their full potential in the application often requires specific surface functionalization with various groups. However, this requirement remains challenging owing to the limitations of wet-chemistry approaches, which frequently result in the generation of hazardous chemical by-products. In this paper, a “green” stirring plasma strategy is presented for the functionalization of octa-methyl POSS sub-micron particles into designable oxygen-containing functional groups using a low-pressure oxygen plasma from combined continuous wave and pulsed (CW+P) modes. Plasma from oxygen gas with CW mode offers highly oxygen-reactive species to continuously etch and activate the surface of the POSS. The resulting pulsed plasma assists in grafting more reactive oxygen species onto the active methyl groups of the POSS to form specific oxygen-containing functional groups including hydroxyl and carboxyl. A precise control of nearly one hydroxyl or one carboxyl group at the corner of the cage structure of the POSS is demonstrated, without damaging the core. Therefore, the plasma process discussed in this work is suggested by the authors as controllable fundamental research for the surface functionalization of sub-micron particles, promoting a more environmentally friendly pathway for the preparation of designable fillers.
materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to develop a "green" plasma functionalization strategy to controllably introduce oxygen - containing functional groups, such as hydroxyl (- OH) and carboxyl (- COOH), on octamethyl POSS (Polyhedral Oligomeric Silsesquioxane) sub - micron particles. Traditional methods are usually based on multi - stage chemical wet - modification, which not only has a complex process and high cost, but also produces harmful chemical by - products. Therefore, the paper proposes a low - pressure oxygen plasma agitation system combining continuous wave (CW) and pulsed (P) modes, aiming to achieve controllable functionalization of the POSS surface in a more environmentally - friendly way. ### Research Background and Problems 1. **Characteristics of POSS Materials** - POSS materials have a unique caged structure, making them efficient fillers in composite membrane separation applications. - In order to fully realize their potential, it is usually necessary to introduce specific functional groups, such as hydroxyl and carboxyl, on their surfaces. 2. **Limitations of Existing Methods** - Although traditional chemical wet - modification methods are effective, they have the disadvantages of complex processes, high costs, and the production of harmful by - products. - Physical methods such as heat treatment and plasma treatment have been proven to reduce environmental waste, but how to achieve uniform functionalization remains a challenge. ### Main Contributions of the Paper - **Proposing a "Green" Plasma Functionalization Strategy**: By combining a low - pressure oxygen plasma agitation system in continuous wave and pulsed modes, controllable functionalization of octamethyl POSS sub - micron particles has been achieved. - **Specific Objectives** - To precisely control the number of hydroxyl or carboxyl groups at each cage corner without destroying the core structure of POSS. - To study the functionalization effects under different conditions by adjusting plasma parameters (such as RF power, treatment time, etc.). ### Experimental Methods - **Sample Preparation**: First, the provided POSS particles are ground to a size of 0.1 - 1 μm by an air - jet mill. - **Plasma Treatment**: Use a customized low - pressure agitated plasma system to perform functionalization treatment through different plasma modes (CW, P, CW + P), RF power, and treatment time. - **Characterization Methods** - Use a scanning electron microscope (SEM) to observe the morphology of POSS particles. - Analyze the chemical structure of POSS by Fourier - transform infrared spectroscopy (FTIR). - Use X - ray photoelectron spectroscopy (XPS) to quantitatively analyze the surface composition. ### Results - **FTIR Analysis**: Characteristic peaks of hydroxyl and carbonyl groups were detected in POSS samples treated under different plasma modes, indicating the successful introduction of oxygen - containing functional groups. - **XPS Analysis**: This further confirmed the introduction of hydroxyl and carboxyl groups, and it was found that when the RF power exceeds 60 W, the core structure of POSS may be damaged. - **Optimal Conditions**: By comparing the results under different conditions, it was found that using an RF power of 50 W and the CW + P mode can achieve the highest functionalization efficiency while keeping the core structure of POSS intact. ### Conclusion This paper proposes a "green" plasma functionalization strategy, which successfully introduces hydroxyl and carboxyl groups on octamethyl POSS sub - micron particles without destroying their core structure. This method is not only environmentally - friendly but also controllable, providing a new way to prepare nano - fillers with specific functions.