Abstract:The transcritical carbon dioxide vapor compression cycle is commonly used for heating and cooling applications because of the high discharge temperature and large evaporation heat. Whereas, high return water temperature is usually required by the heating demands, which significantly degrades the system performances. Nowadays, various kinds of subcooling methods have been proposed for the transcritical carbon dioxide vapor compression cycle, but a systematic comparative study based on the trade-off between the thermodynamic efficiency and economic cost is needed to analyze the applicability of these methods for large-scale district heating and cooling applications. In this work, the hot water temperature increases from 323.15 K to 343.15 K for district heating, and chilled water temperature reduces from 285.15 K to 280.15 K for district cooling. The simple single-stage transcritical carbon dioxide vapor compression cycles using subcooling methods with and without expansion work recovery, including internal heat exchanger, dedicated mechanical subcooling, cooling tower and dry cooler, are respectively modeled from the energetic, exergetic and economic perspectives. Based on the dual-objective Jaya algorithm and Technique for Order of Preference by Similarity to Ideal Solution decision-making method, the parametric study is conducted with optimized system performances to analyze the effects of different ambient conditions, namely the winter mode with ambient temperature from 248.15 K to 278.15 K and the summer mode with ambient temperature from 288.15 K to 318.15 K, and the relative humidity from 30% to 90%. Afterwards, the optimal subcooling methods under different ambient temperatures are selected based on the overall optimization and comparative study. The effects of different ambient temperatures on the system performances vary with different subcooling methods without expansion work recovery, and the dry cooler is the optimal subcooling method at the ambient temperatures from 248.15 K to 268.15 K, while the cooling tower is suggested under ambient temperatures higher than 278.15 K in spite of the performance degradation with high relative humidity. Insignificant differences of system performances using different subcooling methods can be observed with expansion work recovery, and the internal heat exchanger is selected as the optimal subcooling method for winter-mode operations, while the cooling tower is also suggested as the suitable subcooling method in the summer mode.

Subcooling effect on the optimal performance for a transcritical CO2 heat pump with cold thermal energy storage

Subcooling Effect on the Optimal Performance for a Transcritical CO 2 Heat Pump with Cold Thermal Energy Storage

Simulation and Experimental Study of CO2 Transcritical Heat Pump System with Thermoelectric Subcooling

Investigation on the Effects of the Optimal Medium-Temperature on the System Performance in a Transcritical CO2 System with a Dedicated Transcritical CO2 Subcooler

Theoretical Study of a High-Temperature Heat Pump System Composed of a CO 2 Transcritical Heat Pump Cycle and a R152a Subcritical Heat Pump Cycle

Influence of the Source and Sink Temperatures on the Experimental Research of A Co2 Trans-Critical Refrigeration and Heat Pump System

Experimental investigation on thermal characteristics of transcritical CO2 heat pump unit combined with thermal energy storage for residential heating

Thermodynamic Analysis and Experimental Investigation of Internal Heat Exchanger Influence on CO2 Trans-Critical Cycle Performance

Thermodynamic Analysis and Experimental Investigation of Internal Heat Exchanger Influence on CO<sub>2</sub> Trans-Critical Cycle Performance

Experimental Study on the Performance and Control Strategy of a Water-Cooled Subcooler-Assisted Carbon Dioxide Heat Pump for Combined Cooling and Heating

Investigation on the Feasibility and Performance of Transcritical CO2 Heat Pump Integrated with Thermal Energy Storage for Space Heating

Thermodynamic study of carbon dioxide transcritical refrigeration cycle with dedicated subcooling and cascade recooling

Performance Analysis and Operation Optimization of Air-to-water CO2 Heat Pump with Phase Change Thermal Storage

An optimisation study on a real-world transcritical CO<sub>2</sub> heat pump system with a flash gas bypass

Thermoeconomic Optimization and Comparison of the Simple Single-Stage Transcritical Carbon Dioxide Vapor Compression Cycle with Different Subcooling Methods for District Heating and Cooling

Performance analysis of two-stage CO2 transcritical refrigeration cycles with absorption subcooling and mechanical recooling

Effect of Heat Transfer Area and Refrigerant Mass Flux in a Gas Cooler on Heating Performance of Air-Source Transcritical CO2 Heat Pump Water Heater System

Thermodynamic Analysis on Sub-cooling Process in CO_2 Trans-critical Refrigeration Cycle

Experimental Investigation on A Capillary Tube Based Transcritical Co2 Heat Pump System

High-Temperature Heat Pump Using CO2-Based Mixture for Simultaneous Heat and Cold Energy Reservation

Multi-objective optimization analysis of combined heating and cooling transcritical CO 2 system integrated with mechanical subcooling utilizing hydrocarbon mixture based on machine learning