Abstract:This study proposes a novel, high-efficiency, self-condensing transcritical carbon dioxide (tCO 2 ) cycle utilizing a vortex tube, aimed at resolving the condensation issues within tCO 2 cycles to broaden their applicability. Firstly, the thermodynamic model of the proposed cycle was established and validated based on the first and second laws of thermodynamics. Secondly, under the basic operating conditions, this cycle demonstrates energy and exergy efficiencies of 42.00 % and 66.10 %, respectively. These efficiencies surpass those of the current self-condensing tCO 2 cycle with a vortex tube by 6.50 % and 8.85 %, the supercritical carbon dioxide (sCO 2 ) recompression cycle by 0.28 % and 0.55 %, and the sCO 2 simple recuperation cycle by 7.12 % and 9.84 %, under identical conditions. Compared to the three cycles mentioned above, our proposed cycle prevents condensation at the compressor impeller inlet due to near-critical point compression, simplifying pressurization equipment development and enhancing its stability and lifespan. Exergy analysis reveals that the turbine incurs the highest exergy losses in the system, followed by the high-temperature recuperator (HTR) and the high-pressure ratio compressor (HRC). Lastly, by using the method of controlled variables, the study explored how key operational parameters affect the performance of the proposed cycle. The results show that raising the turbine inlet temperature and the vortex tube outlet pressure significantly improves the cycle's efficiency. Optimal split ratios and optimal turbine inlet pressures were identified; notably, variations in the split ratio influence the pinch point location within the low-temperature recuperator (LTR). The impact of the vortex tube inlet temperature and pressure on the efficiency of the proposed cycle is primarily through their effect on the quality of the fluid at the nozzle outlet of the vortex tube. As the vortex tube inlet temperature approaches the critical temperature, the quality of the working fluid at the nozzle outlet decreases, the condensation performance of the vortex tube improves. As the vortex tube inlet pressure approaches the critical pressure, the quality of the fluid changes more significantly with variations in the inlet temperature.

Experimental investigation on CO2-based combined cooling and power cycle

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Experiment on CO2–based combined cooling and power cycle: A multi-mode operating investigation

Investigation on an Innovative Cascading Cycle for Power and Refrigeration Cogeneration

A novel composition tunable combined cooling and power cycle using CO2-based binary zeotropic mixture

Combined cooling and power cycle for engine waste heat recovery using CO2-based mixtures

State-of-the-art Review on the CO2 Combined Power and Cooling System: System Configuration, Modeling and Performance

A novel self-condensing transcritical CO 2 power cycle with a vortex tube: Thermoeconomic assessment study and comparison

Dynamic performance of a multi-mode operation CO2-based system combining cooling and power generation

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Performance analysis of two-stage CO2 transcritical refrigeration cycles with absorption subcooling and mechanical recooling

Experimental Investigations on the Performance of a Single-Stage Compound Air-Source Heat Pump Using CO2/R600a in Cold Regions

Thermodynamic analysis and evaluation of a novel trans-critical CO2 power system incorporating partial condensation, sub-cooling, and recompression

Thermodynamic assessment of a novel and efficient self-condensing transcritical CO 2 power cycle with a vortex tube

Thermodynamic study of carbon dioxide transcritical refrigeration cycle with dedicated subcooling and cascade recooling

Effect of Inter-Stage Pressure on Performances of Two-Stage Transcritical CO2 Refrigeration Cycle with Dedicated Absorption Dual-Subcooling and Mechanical Recooling

Multi-objective Optimization of Combined Cooling, Heating, and Power Systems with Supercritical CO2 Recompression Brayton Cycle

Hybrid Two–stage СО2 Transcritical Mechanical Compression–ejector Cooling Cycle: Thermodynamic Analysis and Optimization

Computer-aided molecular design of CO 2 -based mixture working fluid harvesting engine waste heat

Experimental investigation of a splitting CO2 transcritical power cycle in engine waste heat recovery

Optimization of CO2 Transcritical Power Cycle (CTPC) for engine waste heat recovery based on split concept