Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

A novel composition tunable combined cooling and power cycle using CO2-based binary zeotropic mixture

Analysis of an ideal composition tunable combined cooling and power cycle with CO2-based mixture

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Analysis of a Hybrid System of Liquid Desiccant and CO2 Transcritical Cycles

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

Experimental investigation on CO2-based combined cooling and power cycle

Experiment on CO2–based combined cooling and power cycle: A multi-mode operating investigation

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

A NOVEL COMBINED EJECTOR-ABSORPTION REFRIGERATION CYCLE

A novel absorption refrigeration cycle

Combined cooling and power cycle for engine waste heat recovery using CO2-based mixtures

Experimental investigation on CO 2 -based zeotropic mixture composition-adjustable system

Composition adjustment study of refrigeration and heat pump systems using CO2-based mixture as the working fluid

A Study On A New Auto-Cascade Refrigerating Cycle

Hybrid Two–stage СО2 Transcritical Mechanical Compression–ejector Cooling Cycle: Thermodynamic Analysis and Optimization

Multi-objective optimization analysis of combined heating and cooling transcritical CO 2 system integrated with mechanical subcooling utilizing hydrocarbon mixture based on machine learning

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Thermodynamic performance assessment and application feasibility analysis of small heat pump water heater using CO2/R41 azeotropy mixture as refrigerant for sustainable development

Supercritical CO2 mixture Brayton cycle with floating critical points for concentrating solar power application: Concept and thermodynamic analysis