Abstract:The transcritical carbon dioxide vapor compression cycle is commonly used for heating and cooling applications because of the high discharge temperature and large evaporation heat. Whereas, high return water temperature is usually required by the heating demands, which significantly degrades the system performances. Nowadays, various kinds of subcooling methods have been proposed for the transcritical carbon dioxide vapor compression cycle, but a systematic comparative study based on the trade-off between the thermodynamic efficiency and economic cost is needed to analyze the applicability of these methods for large-scale district heating and cooling applications. In this work, the hot water temperature increases from 323.15 K to 343.15 K for district heating, and chilled water temperature reduces from 285.15 K to 280.15 K for district cooling. The simple single-stage transcritical carbon dioxide vapor compression cycles using subcooling methods with and without expansion work recovery, including internal heat exchanger, dedicated mechanical subcooling, cooling tower and dry cooler, are respectively modeled from the energetic, exergetic and economic perspectives. Based on the dual-objective Jaya algorithm and Technique for Order of Preference by Similarity to Ideal Solution decision-making method, the parametric study is conducted with optimized system performances to analyze the effects of different ambient conditions, namely the winter mode with ambient temperature from 248.15 K to 278.15 K and the summer mode with ambient temperature from 288.15 K to 318.15 K, and the relative humidity from 30% to 90%. Afterwards, the optimal subcooling methods under different ambient temperatures are selected based on the overall optimization and comparative study. The effects of different ambient temperatures on the system performances vary with different subcooling methods without expansion work recovery, and the dry cooler is the optimal subcooling method at the ambient temperatures from 248.15 K to 268.15 K, while the cooling tower is suggested under ambient temperatures higher than 278.15 K in spite of the performance degradation with high relative humidity. Insignificant differences of system performances using different subcooling methods can be observed with expansion work recovery, and the internal heat exchanger is selected as the optimal subcooling method for winter-mode operations, while the cooling tower is also suggested as the suitable subcooling method in the summer mode.

Performance simulation of CO2 transcritical cooling system with mechanical subcooling cycle for automobile air conditioning

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

Cooling performance enhancement for the automobile transcritical CO2 air conditioning system with various internal heat exchanger effectiveness

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Experimental Investigation on Refrigeration Performance of a CO2 System with Intermediate Cooling for Automobiles

Simulation and Experimental Study of CO2 Transcritical Heat Pump System with Thermoelectric Subcooling

Experimental and Theoretical Study on the Cooling Performance of a CO2 Mobile Air Conditioning System

System design and analysis of the trans-critical carbon-dioxide automotive air-conditioning system

Energetic performance evaluation of an automotive CO2 air conditioning system with a dual-evaporator configuration

Performance analysis of two-stage CO2 transcritical refrigeration cycles with absorption subcooling and mechanical recooling

Thermodynamic study of carbon dioxide transcritical refrigeration cycle with dedicated subcooling and cascade recooling

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Numerical simulation of CO<sub>2</sub> two-stage compression refrigeration system with external intercooler

A Study On A New Auto-Cascade Refrigerating Cycle

Effect of Inter-Stage Pressure on Performances of Two-Stage Transcritical CO2 Refrigeration Cycle with Dedicated Absorption Dual-Subcooling and Mechanical Recooling

Thermoeconomic Optimization and Comparison of the Simple Single-Stage Transcritical Carbon Dioxide Vapor Compression Cycle with Different Subcooling Methods for District Heating and Cooling

Review of Recent Advances in Transcritical CO2 Heat Pump and Refrigeration Cycles and Their Development in the Vehicle Field

Subcooling effect on the optimal performance for a transcritical CO2 heat pump with cold thermal energy storage

CFD Simulation Study on the Air Side of a CO2 Evaporator in a Motor Train Unit Air Conditioning System

Experimental investigation on CO2-based combined cooling and power cycle