Magnetic Properties of Composites Based on Amorphous Iron Alloys Produced with the Use of a Non-Magnetic Binder and Covered with High Temperature Varnish

B Jez,K Jez,M Nabialek,K Jez and M Nabialek

DOI: https://doi.org/10.1088/1757-899X/877/1/012027

2020-07-18

IOP Conference Series: Materials Science and Engineering

Abstract:The continuous increase in the demand for electricity causes the need to search for new energy sources and to look for savings during its transmission. One of the areas of interest are materials dedicated to low loss transformer cores. Due to good magnetic properties, amorphous and nanocrystalline iron-based alloys are used in this area. The limited dimensions of these materials make their application difficult. Magnetic composites based on ferromagnetic amorphous alloys are a new direction of research. Usually, composites are made using a non-magnetic binder. However, the separation of magnetic particles worsens the magnetic properties. The solution to this problem may be production of composites coated with high temperature varnish. As part of the work, the results of research on the structure and magnetic properties of composites based on amorphous iron alloys are presented. Composites were made with 0.5% resin by mass and without resin covered with high temperature varnish. Material produced without the use of resin had a lower coercive field value.