Abstract:3D printing of the dielectric elastomer actuator and on‐demand control of the patterned actuators. Dielectric elastomer actuator (DEA) is one of the most promising types of soft actuation technology, which has great potential in the fields of wearable devices and soft robotics. It consists of a dielectric elastomer layer, which is an electroactive polymer that can produce large deformation, and compliant electrodes to bring charges to certain locations. In this article, direct ink writing (DIW) technology, an emerging 3D printing method, was used to realize the preparation of the electrode‐elastomer‐electrode stack of the DEA. The dielectric and electrode materials were designed with suitable rheological properties to fulfill the need for the extrusion process. The formulated silicone material not only presented excellent dielectric and mechanical properties, but also good printability. Extrudable electrodes were prepared based on silicone composites with the characteristics of mechanical compliance and high conductivity. The fully printed DEA achieved a maximum actuation strain of 11.11%, a fast response time of 0.76 s and excellent electromechanical repeatability. DEA arrays were also achieved, possessing the ability to carry out on‐demand actuation, allowing each actuator to be activated singly or work in groups. Thanks to the design freedom of the DIW technology, this strategy is able to manufacture fine and complex structures with precise active zones, paving a way for the fabrication of next‐generation smart devices. Highlights Printable silicone ink was formulated with good dielectric property and softness. Carbon black/silicone composites were obtained with high conductivity and compliant nature. The silicone composites were printed into thin films to act as electrodes. Fully 3D printed dielectric elastomer actuators (DEA) were achieved by direct ink writing. DEA arrays with on‐demand actuation were realized by well‐defined printing.

Ultra‐Thin and Conformable Electrodes Composed of Single‐Walled Carbon Nanotube Networks for Skin‐Contact Dielectric Elastomer Actuators

Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

A New Low Moduli Dielectric Elastomer Nano-Structured Composite with High Permittivity Exhibiting Large Actuation Strain Induced by Low Electric Field

Novel Arrangements For High Performance And Durable Dielectric Elastomer Actuation

Durable Dielectric Elastomer Actuation

Modelling and Control of a Dielectric Elastomer Actuator

Significantly improved electromechanical performance of dielectric elastomers via alkyl side-chain engineering

Ultra-Compliant Liquid Metal Electrodes with In-Plane Self-Healing Capability for Dielectric Elastomer Actuators

Ultrathin skin-conformable electrodes with high water vapor permeability and stretchability characteristics composed of single-walled carbon nanotube networks assembled on elastomeric films

Dielectric Elastomer Fiber Actuators with Aqueous Electrode

A dielectric elastomer actuator with a large actuated strain enabled by CaCu3Ti4O12/MXene/silicone dielectric composite

Design of Facile Dielectric Elastomer-Based Bending Module for Soft Robotics Applications

Bending, electroadhesion and sensing performances of single compliant electrode dielectric elastomer actuator based on SEBS gel

Fully 3D printed dielectric elastomer actuators based on silicone and its composites

Spray-Printing and Spin Methods to Fabricate Multilayered Dielectric Elastomer Actuators Embedded with Liquid Metal Electrodes

Digital Light Processing 3D‐Printed Multilayer Dielectric Elastomer Actuator for Vibrotactile Device

Characterizations and Inkjet Printing of Carbon Black Electrodes for Dielectric Elastomer Actuators

Repeatedly Programmable Liquid Crystal Dielectric Elastomer with Multimodal Actuation.

Improving actuation strain and breakdown strength of dielectric elastomers using core-shell structured CNT-Al2O3