Abstract:Dielectric elastomers (DEs) are actuatable under an electric field, whose large strain and fast response speed compare favorably with natural muscles. However, the actuation of DE-based devices is generally limited to a single mode and cannot be reconfigured after fabrication, which pales in comparison to biological counterparts given the ability to alter actuation modes according to external conditions. To address this, liquid crystal dielectric elastomers (LC-DEs) that can alter the dielectric actuation modes based on the thermally triggered shape-changing are prepared. Specifically, the two shapes through the LC phase transition possess different bending stiffness, which leads to distinct actuation modes after an electric field is applied. Moreover, the two shapes can be individually programmed/reprogrammed, that is, the one before the transition is regulated through force-directed solvent evaporation and the one after the transition is via bond exchange-enabled stress relaxation. As such, the multimodal dielectric actuation behaviors upon temperature change can be readily diversified. Meanwhile, the space charge mechanism endows LC-DEs with the significantly reduced driving e-field (8 V mu m-1) and bidirectional actuation manners. It is believed this unique adaptivity in the actuation modes under a low electric field shall offer versatile designs for practical soft robots. Multiple electric actuation modes can be achieved in a single liquid crystal dielectric elastomer based on its reversible shape changing between the permanent and temporary shape. The independent programmability of these two shapes offers high freedom to fabricate multimodal dielectric actuators with designable actions, which can be triggered at a low electric field due to the space charge mechanism.image

Repeatedly Programmable Liquid Crystal Dielectric Elastomer with Multimodal Actuation.