Abstract:3D printing of the dielectric elastomer actuator and on‐demand control of the patterned actuators. Dielectric elastomer actuator (DEA) is one of the most promising types of soft actuation technology, which has great potential in the fields of wearable devices and soft robotics. It consists of a dielectric elastomer layer, which is an electroactive polymer that can produce large deformation, and compliant electrodes to bring charges to certain locations. In this article, direct ink writing (DIW) technology, an emerging 3D printing method, was used to realize the preparation of the electrode‐elastomer‐electrode stack of the DEA. The dielectric and electrode materials were designed with suitable rheological properties to fulfill the need for the extrusion process. The formulated silicone material not only presented excellent dielectric and mechanical properties, but also good printability. Extrudable electrodes were prepared based on silicone composites with the characteristics of mechanical compliance and high conductivity. The fully printed DEA achieved a maximum actuation strain of 11.11%, a fast response time of 0.76 s and excellent electromechanical repeatability. DEA arrays were also achieved, possessing the ability to carry out on‐demand actuation, allowing each actuator to be activated singly or work in groups. Thanks to the design freedom of the DIW technology, this strategy is able to manufacture fine and complex structures with precise active zones, paving a way for the fabrication of next‐generation smart devices. Highlights Printable silicone ink was formulated with good dielectric property and softness. Carbon black/silicone composites were obtained with high conductivity and compliant nature. The silicone composites were printed into thin films to act as electrodes. Fully 3D printed dielectric elastomer actuators (DEA) were achieved by direct ink writing. DEA arrays with on‐demand actuation were realized by well‐defined printing.

Fully 3D printed dielectric elastomer actuators based on silicone and its composites

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Modelling and Control of a Dielectric Elastomer Actuator

Fabrication and Modeling of Dielectric Elastomer Soft Actuator with 3D Printed Thermoplastic Frame

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

The Soft Ray-Inspired Robots Actuated by Solid-Liquid Interpenetrating Silicone-Based Dielectric Elastomer Actuator.

Novel Arrangements For High Performance And Durable Dielectric Elastomer Actuation

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

Durable Dielectric Elastomer Actuation

Characterizations and Inkjet Printing of Carbon Black Electrodes for Dielectric Elastomer Actuators

All-Silicone 3D Printing Technology: Toward Highly Elastic Dielectric Elastomers and Complex Structures

Digital Light Processing 3D‐Printed Multilayer Dielectric Elastomer Actuator for Vibrotactile Device

An Integrated Design and Fabrication Strategy for Planar Soft Dielectric Elastomer Actuators

Ultra-Compliant Liquid Metal Electrodes with In-Plane Self-Healing Capability for Dielectric Elastomer Actuators

A Unidirectional Soft Dielectric Elastomer Actuator Enabled by Built-In Honeycomb Metastructures.

3D Printing of Silicone Elastomers for Soft Actuators

Multi-Material 3D Printing of Highly Stretchable Silicone Elastomer.

3D printing dielectric elastomers for advanced functional structures: A mini‐review

Spray-Printing and Spin Methods to Fabricate Multilayered Dielectric Elastomer Actuators Embedded with Liquid Metal Electrodes

A dual cone actuator with high energy density and long fatigue life by developing a nano-silica reinforced dielectric elastomer composite

Constructing inkjet printed dielectric elastomers with modified silicon carbide nanowire surfaces to enhance electromechanical performance