Abstract:Herein, we report on conductive ultrathin films (nanosheets) with the characteristics of stretchability and water vapor permeability for skin-conformable bioelectrodes. The films are fabricated by combining conductive fibrous networks of single-wall carbon nanotubes (SWCNTs) and poly(styrene- b -butadiene- b -styrene) (SBS) nanosheets (i.e., SWCNT-SBS nanosheets). An increase in the number of SWCNT coatings increases both the thicknesses and densities of the SWCNT bundles. The SBS nanosheets coated with three layers of SWCNTs (i.e., SWCNT 3rd-SBS nanosheets) show comparable sheet resistance to the SBS nanosheets coated with poly(3,4-ethylenedioxithiophene) doped with poly(4-styrenesulfonate acid) (PEDOT:PSS) containing 5 wt.% butylene glycol (i.e., PEDOT:PSS/BG5-SBS nanosheets). In addition, the SWCNT 3rd-SBS nanosheets exhibit significantly reduced elastic moduli and increased elongations at break compared to the PEDOT:PSS/BG5-SBS nanosheets. Furthermore, the calculated water vapor transmission ratio of the 210-nm-thick SBS nanosheets (268,172 g m −2 (2 h) −1 ) is greater than that of the filter paper (6345 g m −2 (2 h) −1 ). The SWCNT 3rd-SBS nanosheets attached to model skin show high tolerances to bending and artificial sweat at different pH values (i.e., the electrical resistance changes ~1.1 times). Finally, the SWCNT 3rd-SBS nanosheet is applied to detect the surface electromyogram from the forearm of a subject. This nanosheet displays a signal-to-noise ratio similar to that of the PEDOT:PSS/BG5-SBS nanosheet.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an ultrathin, stretchable, and high - water - vapor - permeability skin - conformable electrode for the long - term monitoring of bioelectrical signals (such as electromyography, electrocardiography, etc.). Specifically, the author aims to overcome the deficiencies of existing commercial bioelectrodes in long - term applications, including: 1. **Low elasticity and low breathability**: Traditional electrodes usually do not have good elasticity and breathability due to their thick structure and hard materials, resulting in the inability to adapt to the natural deformation of the skin and may cause skin discomfort or inflammation. 2. **Unstable signal quality**: In situations such as movement or sweating, the resistance of traditional electrodes changes significantly, affecting the quality and stability of the signal. To solve these problems, the author designed a new ultrathin electrode (SWCNT - SBS nanosheet) based on a single - walled carbon nanotube (SWCNTs) network and an elastomer film (SBS). This electrode not only has good electrical conductivity and mechanical properties but also can allow water vapor to permeate while maintaining skin - conformability, thereby avoiding sweat accumulation and ensuring the comfort and reliability of long - term wearing. ### Main research contents 1. **Material preparation and characterization**: - Prepare SWCNT - SBS nanosheets with different numbers of layers and densities by multi - layer coating of SWCNT aqueous dispersion. - Characterize the microstructure and optical properties of the nanosheets by means of scanning electron microscopy (SEM), UV - Vis absorption spectroscopy, etc. 2. **Electrical and mechanical property tests**: - Measure the sheet resistance of the nanosheets and analyze its changing trend with the increase in the number of coating layers. - Conduct tensile tests to evaluate the elongation at break and elastic modulus of the nanosheets and explore the influence of SWCNT density and thickness on their mechanical properties. 3. **Water - vapor - permeability - rate test**: - Measure the water - vapor - permeability rate (WVTR) of the nanosheets using the JIS Z0208 standard method and compare it with traditional electrodes to verify its high breathability. 4. **Biocompatibility and durability tests**: - Evaluate the electrical - performance stability of the nanosheets under bending, artificial - sweat - immersion, and friction conditions. - Test the adhesion of the nanosheets on human skin to ensure their reliability and comfort in practical applications. 5. **Bioelectrical - signal detection**: - Use SWCNT - SBS nanosheets to perform surface electromyography (sEMG) measurements and compare the signal - to - noise ratio (SNR) differences with traditional Ag/AgCl gel electrodes. ### Conclusion Through the above research, the author has proven that SWCNT - SBS nanosheets, as a new type of skin - conformable electrode, have the following advantages: - **High breathability**: Significantly higher than traditional electrodes, effectively avoiding sweat accumulation. - **Good mechanical properties**: Possessing high stretchability and low elastic modulus, being able to adapt to the natural deformation of the skin. - **Stable electrical properties**: Exhibiting excellent stability and durability under bending, sweat - immersion, and friction conditions. - **Reliable biocompatibility**: Having good adhesion to the skin surface, being suitable for long - term wearing. Therefore, this new type of electrode provides new ideas and technical support for the design of future wearable bioelectrodes.

Ultrathin skin-conformable electrodes with high water vapor permeability and stretchability characteristics composed of single-walled carbon nanotube networks assembled on elastomeric films

Biodegradable, Self‐Adhesive, Stretchable, Transparent, and Versatile Electronic Skins Based on Intrinsically Hydrophilic Poly(Caproactone‐Urethane) Elastomer

High-Performance Auxetic Bilayer Conductive Mesh-Based Multi-Material Integrated Stretchable Strain Sensors.

Highly Conductive, Flexible, and Robust Silver Nanowire-Embedded Carboxymethyl Cellulose/Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate) Composite Films for Wearable Heaters and On-Skin Sensors

Conductive Polymer-Coated Carbon Nanotubes to Construct Stretchable and Transparent Electrochemical Sensors.

Ultra‐Thin and Conformable Electrodes Composed of Single‐Walled Carbon Nanotube Networks for Skin‐Contact Dielectric Elastomer Actuators

Spray-Coated Ultrathin and Porous Films for Physiological Sensing and Force Detection

Stretchable, breathable, and washable epidermal electrodes based on microfoam reinforced ultrathin conductive nanocomposites

Highly Robust, Transparent, and Breathable Epidermal Electrode.

Highly conductive, stretchable, and breathable epidermal electrode based on hierarchically interactive nano-network.

Highly Conductive, Stretchable, Durable, Breathable Electrodes Based on Electrospun Polyurethane Mats Superficially Decorated with Carbon Nanotubes for Multifunctional Wearable Electronics

Cryo-Transferred Ultrathin and Stretchable Epidermal Electrodes.

Highly Thermal-Wet Comfortable and Conformal Silk-Based Electrodes for On-Skin Sensors with Sweat Tolerance

Sandwich-Structured Carbon Nanotube Composite Films for Multifunctional Sensing and Electrothermal Application

Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics

Breathable, Self-Adhesive Dry Electrodes for Stable Electrophysiological Signal Monitoring During Exercise

Substrate-free ultra-thin epidermal bioelectrodes with enhanced conformality and breathability for long-term physiological monitoring

Gas-permeable and stretchable on-skin electronics based on a gradient porous elastomer and self-assembled silver nanowires

Wrinkled and Fibrous Conductive Bandages with Tunable Mechanoelectrical Response Toward Wearable Strain Sensors

Self-Healable Conductive Nanocellulose Nanocomposites for Biocompatible Electronic Skin Sensor Systems

Electronic skin using cellulose nanofiber/hollow polypyrrole microspheres with good sensitivity and vapor permeability