Abstract:Skin-like electronics that can provide comprehensively tactile sensing is required for applications such as soft robotics, health monitoring, medical treatment, and human–machine interfaces. In particular, the capacity to monitor the contact parameters such as the magnitude, direction, and contact location of external forces is crucial for skin-like tactile sensing devices. Herein, a flexible electronic skin which can measure and discriminate the contact parameters in real time is designed. It is fabricated by integrating the three-dimensional (3D) hollow MXene spheres/Ag NW hybrid nanocomposite-based embedded stretchable electrodes and T-ZnOw/PDMS film-based capacitive pressure sensors. To the best of our knowledge, it is the first stretchable electrode to utilize the 3D hollow MXene spheres with the essential characteristic, which can effectively avoid the drawbacks of stress concentration and shedding of the conductive layer. The strain-resistance module and the pressure-capacitance module show the excellent sensing performance in stability and response time, respectively. Moreover, a 6 × 6 sensor array is used as a demonstration to prove that it can realize the multiplex detection of random external force stimuli without mutual interference, illustrating its potential applications in biomimetic soft wearable devices, object recognition, and robotic manipulation.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c06993.Surface roughness of the T-ZnOw/PDMS film and pure PDMS film (AVI)Structural stability of the 3D hollow MXene spheres/Ag NWs/PDMS-based embedded stretchable electrodes (MP4)SEM images of positively charged PS spheres, self-assembly 3D hollow MXene spheres, Ag NWs, and 3D hollow MXene spheres/Ag NWs/PDMS hybrid conductive layer; TEM of 3D hollow MXene spheres; EDS of 3D hollow MXene spheres/Ag NWs/PDMS-based embedded stretchable electrodes; AFM image of the 3D hollow MXene spheres/Ag NWs/PDMS hybrid conductive layer; conductivity stability of the embedded stretchable electrodes based on the hollow MXene spheres/Ag NW hybrid nanocomposite; schematic diagram of the T-ZnOw/PDMS film preparation process; schematic diagram of the action mechanism of the silane-coupling agent KH570; characterizations of the T-ZnOw and T-ZnOw/PDMS film; comparison results of FTIR between untreated T-ZnOw and KH570-treated T-ZnOw; 3D roughness image of the T-ZnOw/PDMS film; graphical explanation of capacitive pressure sensors based on T-ZnOw/PDMS and PDMS; T-ZnOw/PDMS film exhibiting superhydrophobicity, where the contact angle of the water droplet is 151°; comparison of hydrophobicity with 2000 bending cycles; comparison of hydrophobicity with different r; relative capacitance changes of the capacitive pressure sensor; and change of capacitance attributed to the interaction of plate spacing and the dielectric constant Δε (PDF)This article has not yet been cited by other publications.

Self-assembly of dendritic-lamellar MXene/Carbon nanotube conductive films for wearable tactile sensors and artificial skin

Controlled Assembly of MXene Nanosheets as an Electrode and Active Layer for High‐Performance Electronic Skin

Hollow MXene Sphere-Based Flexible E-Skin for Multiplex Tactile Detection

A conductive polyacrylamide hydrogel enabled by dispersion-enhanced MXene@chitosan assembly for highly stretchable and sensitive wearable skin

Mixed-Dimensional MXene Nanocomposites/Aramid Nanofibers-Based Flexible Pressure and Strain Sensor for Electronic Skin

Foot-scale MXene Film of Ultrathin Electronic Skin for Wearable Motion Sensors

Wearable Pressure Sensor Array with Layer-by-Layer Assembled MXene Nanosheets/Ag Nanoflowers for Motion Monitoring and Human-Machine Interfaces

Dual-Mode Flexible Sensor Based on PVDF/MXene Nanosheet/Reduced Graphene Oxide Composites for Electronic Skin

Flexible multiresponse-actuated nacre-like MXene nanocomposite for wearable human-machine interfacing

Roll-to-roll layer-by-layer assembly bark-shaped carbon nanotube/Ti3C2Tx MXene textiles for wearable electronics

A Facile Realization Scheme for Tactile Sensing with a Structured Silver Nanowire‐PDMS Composite

Dual conductive network sensors based on an MXene/PDES supramolecular elastomer and their performance

Flexible, transparent and conductive wearable electronic skin based on 2D titanium carbide (MXene) ink

Rapid-Response, Low Detection Limit, and High-Sensitivity Capacitive Flexible Tactile Sensor Based on Three-Dimensional Porous Dielectric Layer for Wearable Electronic Skin

Emerging MXene‐Based Flexible Tactile Sensors for Health Monitoring and Haptic Perception

Hierarchical MXene@ZIF‐67 Film Based High Performance Tactile Sensor with Large Sensing Range from Motion Monitoring to Sound Wave Detection

Skin-Inspired Pressure Sensor with MXene/P(VDF-TrFE-CFE) as Active Layer for Wearable Electronics

Human Epidermis/Touch Receptor Inspired Pressure Sensors Based on Graphene Oxide/Multi-Walled Carbon Nanotubes Composites with Wavy Microstructures for Wearable Textile Electronics

Ti3C2Tx MXene Nanosheet-Functionalized Leathers for Versatile Wearable Electronics

A Bioinspired MXene-based Flexible Sensory Neuron for Tactile Near-Sensor Computing

Sustainable and High Performance MXene Hydrogel with Interlocked Structure for Machine Learning-Facilitated Human-Interactive Sensing