Abstract:PurposeAccurate 2D profile measurements at submillimeter precision are necessary for proton beam commissioning and periodic quality assurance (QA) purposes and are currently performed at our institution with a commercial scintillation detector (Lynx PT) with limited means for independent checks. The purpose of this work is to create an independent dosimetry system consisting of an in-house optical scanner and a BaFBrI:Eu2+ storage phosphor dosimeter by: (a) determining the optimal settings for the optical scanner, (b) measuring 2D proton spot profiles with the storage phosphors and (c) comparing them to similar measurements using a commercial scintillation detector. MethodsAn in-house two-dimensional (2D) laboratory optical scanner was constructed and spatially calibrated for accurate 2D photostimulated luminescence (PSL) dosimetry. Square 5 x 5 cm2 BaFBrI:Eu2+ dosimeter samples were uniformly irradiated with line scans performed to determine the physical and electronic scanner settings resulting in the highest signal-to-noise ratios (SNR) at a sub-millimeter spatial resolution. The resultant spatial resolution of the scanner was then quantitatively assessed by measuring (a) line pairs on a standard x-ray lead bar phantom and (b) modulation transfer functions. Following this, 2D proton spot profiles from a Mevion S250i Hyperscan proton unit were obtained at 1, 10, 20, 30, 40 and 50 monitor unit (MU) settings at maximum energy (E0 = 227.1 MeV) and compared to baseline profiles from a commercial scintillation detector, where 1 MU is calibrated to deliver 1 Gy absolute proton dose-to-water under reference conditions, i.e. 41 × 41 proton spots uniformly spaced by 0.25 cm within a 10 × 10 cm2 square field size at maximum energy (227.1 MeV) in water at depth of 5 cm at isocenter. The dosimetric system's sensitivities to (a) ±1 mm positional shifts and (b) ±0.3 mm beam lateral spread changes were quantitatively evaluated through a Gaussian fitting of the crossline and inline plots of the respective artificially shifted beam profiles. ResultsThe physical scanner settings of (a) Δτ = 27 ms time interval between data samples, (b) vx = 1.235 cm/s scanning speed, (c) 1% laser transmission (0.02 mW power) and (d) (Δx, Δy) = (0.33 mm, 0.50 mm) pixel sizes with electronic settings of (a) 300 microseconds time constant, (b) normal dynamic reserve, (c) 24 dB/oct low pass filter slope and (d) 160 Hz chopping frequency resulted in the highest SNR while maintaining sub-millimeter spatial resolution. The BaFBr0.85I0.15:Eu2+ storage phosphor dosimeters were linear from 1 – 50 MU and their profiles did not saturate up to 150 MU. The scanner was able to detect lateral displacements of ±1 mm in both the crossline and inline directions and ±0.3 mm beam spread changes that were artificially introduced by varying the incident proton energy. Specific to our proton unit, proton energy changes of ±1 MeV can also be detected indirectly via beam spread measurements. ConclusionOur combined dosimetric system including an in-house laboratory optical scanner and reusable BaFBr0.85I0.15:Eu2+ storage phosphors demonstrated a sufficient spatial resolution and dosimetric accuracy to support its use as an independent proton spot measurement dosimeter system. Its wide dynamic range allows for other versatile applications such as proton halo measurements.

Realizing Simultaneous X‐Ray Imaging and Dosimetry Using Phosphor‐Based Detectors with High Memory Stability and Convenient Readout Process

Organic room-temperature phosphorescent polymers for efficient X-ray scintillation and imaging

Organic phosphors with bright triplet excitons for efficient X-ray-excited luminescence

Flexible X-ray Imaging and Stable Information Storage of SrF2:Eu Based on Radio-Photoluminescence

Low-dose real-time X-ray imaging with nontoxic double perovskite scintillators

Organic Semiconductor Devices for X-ray Imaging

Eu3+ Single-Doped Phosphor with Antithermal Quenching Behavior and Multicolor-Tunable Properties for Luminescence Thermometry

X‐Ray Real‐Time Imaging and Delayed Imaging from Lead‐Free Perovskite Scintillators

Advancing X-ray Luminescence for Imaging, Biosensing, and Theragnostics

Energy-Trapping Management in X-Ray Storage Phosphors for Flexible 3D Imaging

Design, Fabrication and Characterization of Nanocaged 12cao·7al2o3:Tb3+ Photostimulable Phosphor for High-Quality X-ray Imaging

Manipulation of Shallow-Trap States in Halide Double Perovskite Enables Real-Time Radiation Dosimetry

High-resolution X-ray luminescence extension imaging

All-inorganic perovskite nanocrystal scintillators

Flexible X-ray Imaging and Stable Information Storage of SrF 2 :Eu Based on Radio-Photoluminescence

Development of a storage phosphor imaging system for proton pencil beam spot profile determination

Differential response under X-ray/UV dual-mode excitation in single-component defect state phosphor X-ray imaging and Wavelength-Multiplexing information storage

High-Performance X-Ray Imaging using Lanthanide Metal-Organic Frameworks

Enhancing persistent radioluminescence in perovskite scintillators through trap defect modulation

Stable perovskite single-crystal X-ray imaging detectors with single-photon sensitivity

Solution-Processed Hybrid Europium (II) Iodide Scintillator for Sensitive X-Ray Detection