Abstract:This study focuses on optimizing the thermal, morphological, scratch resistance, and anti-barrier characteristics of newly developed hybrid sol-gel coatings. The coatings were formulated by varying the synthetic precursors and incorporating a clay additive. The hybrid coatings were prepared using a mixture of organosilane and zirconium propoxide precursors, and further modified with polydimethylsiloxane (PDMS) and Cloisite 20 A (C20A) clay additives. The coatings were applied onto mild steel substrates and their corrosion protection in 3.5 wt% NaCl solutions were evaluated through electrochemical and visual observation testing. Contact angle measurements revealed a hydrophobic nature of the developed coatings on the steel surfaces, primarily attributed to the presence of an organosilane precursor with a long C18-alkyl chain functionality in all formulations. Electrochemical testing data demonstrated that the coating formulation containing the polydimethylsiloxane precursor exhibited good corrosion protection. After 14 days of immersion in a saline medium, this sample exhibited impedance values higher than 10 6 Ω.cm 2 and a low corrosion rate of 3.5 × 10 −3 mpy, as determined by electrochemical impedance spectroscopy (EIS) and polarization testing, respectively. Morphological analyzes confirmed the homogeneous and integrated coating layer of this sample, which contributed to its enhanced corrosion protection. Furthermore, the inclusion of the Zr-propoxide precursor in a formulation containing only silane precursors demonstrated favorable effects on the desired coating properties. The hybrid sol-gel coatings exhibited excellent anti-barrier characteristics, which can be attributed to the formation of highly cross-linked Si-O-Si networks. Overall, the reported hybrid coating formulations offer promising alternatives to commercially available toxic conversion coatings, as they exhibit excellent anti-barrier properties and can be considered environmentally friendly.

Corrosion protection performance of silicon-based coatings on carbon steel in NaCl solution: a theoretical and experimental assessment of the effect of plasma-enhanced chemical vapor deposition pretreatment

Changes of Corrosion Electrochemical Behavior of Cerium Nitrate Doped GPTMS/TEOS Silane Hybrid Films with Immersion Time

Synthesis of hybrid organosilicon materials of various chemistries as efficient protective coatings for mild steels in NaCl media

CATHODICALLY ELECTROCHEMICAL-ASSISTED DEPOSITION AND PROTECTIVE PROPERTIES OF SILANE FILMS

Nanocomposite coatings based on graphene and siloxane polymers deposited by atmospheric pressure plasma. Application to corrosion protection of steel

Hybrid Organosilicon-Metal oxide Composites and their Corrosion Protection Performance for Mild Steel in 3.5% NaCl Solution

Improved Corrosion Protection of Aluminum Alloys by Electrodeposited Silanes

Performance of curing epoxy resin as potential anticorrosive coating for carbon steel in 3.5% NaCl medium: Combining experimental and computational approaches

Development and potential performance of prepolymer in corrosion inhibition for carbon steel in 1.0 M HCl: Outlooks from experimental and computational investigations

Modification of Silicon-polyurethane-based Sol-gel Coatings Through Diverse Plasma Technologies: Investigation of Impact on Surface Properties

Electrochemical Behavior of Steel Coated with Organosilicon Self-Organizing Layers

Preparation of Sol-Gel Derived Anticorrosive Coating on Q235 Carbon Steel Substrate with Long-Term Corrosion Prevention Durability

Enhanced corrosion resistance of carbon steel in an aggressive environment by a recently developed pyrazole derivative: Electrochemical, SEM/XPS/AFM, and theoretical investigation

Preparation and performance of a new silylated functional carbon quantum dots corrosion inhibitor

Development of superhydrophobic and corrosion resistant coatings on carbon steel by hydrothermal treatment and fluoroalkyl silane self-assembly

Corrosion behavior and passive stability of multilayer DLC-Si coatings

Characterization of Polyorganosilazane-Derived Hybrid Coatings for the Corrosion Protection of Mild Steel in Chloride Solution

Anti-corrosion performance of a new silane coating for corrosion protection of AZ31 magnesium alloy in Hank's solution

Corrosion Resistance and Tribological Behavior of Ag-Ge/Nano-SiC Coatings Prepared by Pulse Electrodeposition

Corrosion behaviors of polysiloxane-ferroferric oxide coating coated on carbon steel in NaCl solution and geothermal water